STA-RITE PoolShark GW7500 Owner's Manual
  1. Manuals
  2. Brands
  3. STA-RITE Manuals
  4. Swimming Pool Vacuum
  5. PoolShark GW7500
  6. Owner's manual
STA-RITE PoolShark GW7500 Owner's Manual

STA-RITE PoolShark GW7500 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PoolShark
Vacuum
®
O
W
N
E
R '
S
M
A
N
U
A
L
INSTALLATION, OPERATION & PARTS
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
International: 262-728-5551, FAX: 262-728-7550
www.starite.com
Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA
S582 (Rev. 8/5/04)
© 2004, Sta-Rite Industries
Printed in U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PoolShark GW7500 and is the answer not in the manual?

Questions and answers

Related Manuals for STA-RITE PoolShark GW7500

Summary of Contents for STA-RITE PoolShark GW7500

  • Page 1 INSTALLATION, OPERATION & PARTS Sta-Rite Pool/Spa Group 293 Wright Street, Delavan, WI 53115 International: 262-728-5551, FAX: 262-728-7550 www.starite.com Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA S582 (Rev. 8/5/04) © 2004, Sta-Rite Industries Printed in U.S.A.

  • Page 2: Safety

    PLEASE READ THE FOLLOWING ABOUT YOUR POOL BEFORE INSTALLING YOUR NEW AND FILTER SYSTEM: AUTOMATIC POOL CLEANER! Before installing your cleaner, review and under- stand all warnings and safety information on the inside front cover of this manual. About Safety: Pre-installation check list This is the safety alert symbol.

  • Page 3: Table Of Contents

    CONTENTS: ASSEMBLY Safety................2 1. Remove the PoolShark and all of its parts from the box ® and check to make sure that all the parts and compo- Assembly ................3 nents were included (see Figure 1). Installation ................3 2. Dampen the female end of the short leader hose sec- Initial Adjustments and Operational Checks ....4 tion with water and connect it to the swivel of your Maintenance ..............6...

  • Page 4: Initial Adjustments And Operational Checks

    3. Remove the skimmer basket. 3. If necessary, insert the Reducer Cone into the dedi- cated vacuum line port. 4. Install the reducer cone in the skimmer. 4. Place the PoolShark (with the Hose Asembly attached) 5. Place the PoolShark (with the Hose Assembly attached) in the pool with the bumper facing downward.
  • Page 5 NOTICE: If the skimmer does not allow you to see the Do you have too much vacuum? Yellow Band on the Regulator, the following TEMPORARY You have too much vacuum if the PoolShark sucks air procedure will let you check the suction: when it climbs up to the water line.

  • Page 6: Maintenance

    MAINTENANCE • Check for debris in the PoolShark’s oscillator. Debris may prevent oscillator movement or restrict the flow Hazardous suction. Suction through the through the cleaner. PoolShark can entrap bathers, causing severe injuries or • Check the oscillator for: damage; lost seals (there drowning.

  • Page 7: About "Fine-Tuning" Vacuum Adjustments And Connections

    NOTICE: DO NOT drill the holes if your PoolShark CAN In-Line leaf canisters climb the pool walls! If your pool is exposed to large quantities of leaves, we suggest purchasing and installing an in-line leaf canister. A Pool pump suction is hazardous and can leaf canister will provide more debris-loading capacity and cause entrapment with severe personal injury or drown- also provides a water by-pass when the canister is full.

  • Page 8: Disassembly

    Disassembly 3900 0201 Step 1: With a screwdriver, carefully work the rubber vac- uum pad down over the lip of the Outer Housing. Step 4: Pull the Oscillator Straight out from the bottom of the Outer Housing. Be careful not to lose the Sliding Seals. 3904 0201 3901 0201 Step 5: Squeeze the latching tabs and pull up on the...
  • Page 9 Disassembly (continued) 3907 0201 3906 0201 Reassembly: To reassemble the PoolShark, reverse the Step 7: Remove the Oscillator Sleeve, releasing the steps above. NOTE: The notch on the center disk of the Oscillator Sleeve Bushing and the Clutch assembly. Large Steering Drive Assembly must be down (as shown) for assembly.
  • Page 10 PoolShark Exploded View 3908 0201...

  • Page 11: Repair Parts

    PoolShark Repair Parts List Part Model Model Description Qty. GW7500 GW7700 • Steering Kit (Incl. Key Nos. 2,3,4) GW7505 GW7515 Swivel Housing Swivel Swivel Sprocket Clutch Clip • Clutch Kit (Incl. Key Nos. 5,8,21,23) GW7503 GW7503 Oscillator Sleeve Bushing Oscillator Sleeve Clutch Assembly •...

  • Page 12: Warranty

    • Complete a warranty registration at www.staritepool.com by clicking on “Register Products” and selecting Sta-Rite Pool OR • Complete bottom portion completely and mail within 10 days of installation to Sta-Rite, Attn.: Pool Warranty Dept., 293 Wright St., Delavan , WI 53115 Warranty Registration Card ■...

This manual is also suitable for:

Poolshark gw7700

Table of Contents