Download Print this page

Brodit 810827 Quick Start Manual

Headrest mount with monitor mount

Download this manual

Product 810827

810827 Headrest mount with monitor mount Angled. For multimedia-monitors with a vertical slot in back.

Headrest mount

For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen

mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to

avoid reflection. It's easy to take the screen with you when leaving the vehicle. The installation is quick and will

not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model?

Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm,

this product will fit your vehicle.

EAN: 7320288108278

Item no 810827 fits:

BMW 5-series F10, F11 10-17 (For all countries)

BMW 5-series GT F07 10-17 (For all countries)

BMW 7-series F01, F02 09-15 (For all countries)

Page 1 25 August, 2021, www.brodit.com, © 2021 Brodit AB Product 810827 810827 Headrest mount with monitor mount Angled. For multimedia-monitors with a vertical slot in back. Headrest mount For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest.
Page 2 INSTALLATION INSTRUCTIONS Attention! Read all instructions before attaching the head rest mount. 1. Remove the head rest. Place the head rest mount onto the head rest bars. The face plate shall be on the back side of the head rest. Put back the head rest. If the head rest can not be removed, remove the two screws in the frontside of the head rest mount.