Controller Panel Nad Display Description - KALE AIRFREE Series Quick Start Manualline

3. Specification of parameters for cont rol sys tem
LCD display status confirmation
After the controller is powered on, when the switch points to ON, the machine is
powered on, and the LCD displays: given rotating speed, operating current, input
voltage, operating status, whether "output rotating speed" is locked, failure
interface and other specific interface information as follows:
Operating interface
Fan Speed
RUN
50
RPM
1.5
V
Top left: Setting rotating speed
Lower left: Voltage
Right: Operating
Setting interface
Set
S00 return
S01 Speed lock
S02 Motor learning S02 Motor learning
Line1: Setting
Line2: S00 Return
Line3: S01 Rotating speed unlocked
Line4: S02 Motor Self-learning
User setting interface description
User setting interface description
In the standby state, long press (more than 2s) knob to enter the " Setting interface",
and the setting interface functions are as follows:
Description
Function code
Reture
S00
Rotating speed unlocked/
S01
rotating speed locked
S02
Motor Self-learning
S03
Operation direction switch
INSTRUCTION MANUAL
Standby interface
Fan Speed
50
STANDBY
RPM
1.5
V
Top left: Setting rotating speed
Lower left: Voltage
Right: Standby
Failure interface
ER
Error code
E.0LF [1909]
contact us
Top left: Failure Code
Lower left: Please contact factory
Right: ER Logo
Explaination
Function can be used to return to the main
interface/if it doesn't return by this function,
and it will automatically return to the main
interface after 10s.
After locked: the adjusting knob will not change
the given rotating speed to prevent accidental
touch, and select this function again to unlock
the rotating speed.
The motor operation control effect is better after
self-learning.
If the motor runs in the wrong direction, the motor
direction can be switched by this function.
www.kalefans.net
Accelerating interface
Fan Speed
ACCEL
50
RPM
1.5
V
Top left: Setting rotating speed
Lower left: Voltage
Right: Accelerating
Decelerating interface
Fan Speed
DECEL
50
RPM
1.5
V
Top left: Setting rotating speed
Lower left: Voltage
Right: Decelerating
-7-