Summary of Contents for Sterling Pro SP1HC GR
- Page 1 USER INSTRUCTION MANUAL BACK BAR BOTTLE COOLER Please keep in safe place for future reference...
- Page 2 INTRODUCTION Thank you for purchasing a Sterling Pro Bottle Cooler. The range has been designed and manufactured to high standards to give a long and reliable life. Please read carefully the contents of this manual and ensure installation and operation instructions are followed.
- Page 3 OPERATION Do not switch power on and off in quick succession as this will damage the compressor and cause the appliance to fail. After completing electrical installation, power can be switched on at the mains. On power up the compressor and fans will start and the internal light should illuminate (ensure light switch is on).
- Page 4 FAULT FINDING The appliance is leaking: - Check cabinet is level, try tilting back slightly. The cabinet should be slightly higher at the front to encourage any moisture from the defrost programme running to the rear of the unit. To be evaporated from the rear tray, this can be done by adjusting the front feet. The appliance does not start: - Check the plug is correctly inserted and the socket is switched on - Check that there is power at the socket...
Need help?
Do you have a question about the SP1HC GR and is the answer not in the manual?
Questions and answers