Download Print this page

Intended Use; Technical Specifications; General Safety Rules - Redline T830003L Owner's Manual

Aluminum racing jack

Advertisement

INTENDED USE

This jack has a single hydraulic pump piston that effortlessly raises the lift arm. Pump piston dust shields
and wiper seals protect the hydraulic system from contaminants. The jack features an overload valve bypass
system to prevent jack damage and user injury. Compact design allows use in confined spaces. Easily fits
under low vehicles.

TECHNICAL SPECIFICATIONS

Item
T830003L

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result
in serious injury.
CAUTION: Do not allow persons to operate or assemble this jack until they have read this manual and
have developed a thorough understanding of how the jack works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur. It must be understood by the operator
that common sense and caution are factors that cannot be built into this product, but must be supplied by
the operator.
INSPECTION
• Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn, or missing
parts.
• Do not use the jack unless it is properly lubricated.
• Using a jack that is not in good clean working condition or properly lubricated may cause serious injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the Service Jack and user safety, the responsibility of the owner is to read and follow these
instructions.
• Inspect the service jack for proper operation and function.
• Keep instructions readily available for equipment operators.
• Make certain all equipment operators are properly trained; understand how to safely and correctly operate
the unit.
• Allow unit operation only with all parts in place and operating properly.
• Use only genuine replacement parts.
• Service and maintain the unit only with authorized or approved replacement parts; negligence will make the
jack unsafe for use and void the warranty.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
• Store these instructions in the handle of your jack.
• Keep all decals on the unit clean and visible.
Capacity
Lifting Range
Min. (Inch)
3 TON
3.86
GENERAL SAFETY RULES
IMPORTANT SAFETY CONSIDERATIONS
Lifting Range
Lifting Range
Max. (Inch)
18.9
2
Lifting Range
Min. (mm)
Max. (mm)
98
480

Advertisement

loading