Advertisement
Quick Links
Advertisement
Related Manuals for Siemens Mobile SF65
Summary of Contents for Siemens Mobile SF65
- Page 1 Company Confidential Copyright 2005© Siemens AG Service Repair Documentation Level 2 – SF65 Release Date Department Notes to change 05.01.2005 COM MD CC GRM T New document 27.01.2005 COM MD CC GRM T Small changes Page Service Repair Documentation Level 2 – SF65...
- Page 2 For all activities the international ESD regulations have to be considered. Assembling/disassembling has to be done according to the latest SF65 Level 2 repair documentation. It has to be ensured that every repaired mobile Phone is checked according to the latest released General Test Instruction document (both documents are available in the Technical Support section of the C-market).
-
Page 3: Table Of Contents
Copyright 2005© Siemens AG Table Of Content GPRS (General Packet Radio Service)..................4 Key Features..........................5 Accessories..........................6 Exploded View ..........................6 Disassembly of SF65........................9 Assembly of SF65........................14 IMEI Label Description......................19 Water Indicator.......................... 20 Page Service Repair Documentation... -
Page 4: Gprs (General Packet Radio Service)
10 times as fast as current Circuit Switched Data services on GSM networks Example: Cell with 1 Frequency channel: 1 physical channel for signaling, 4 physical channels for Circuit switched and 3 physical channels for Packet switched. Page Service Repair Documentation Level 2 – SF65... -
Page 5: Key Features
No ALS CPHS T9 method inside. Text input Phone No. Memory Supported: Call list contains all numbers: Incoming, outgoing, missed calls. Supported: Speaker dependent. Voice Recognition Supported Echo cancellation Supported Noise reduction Page Service Repair Documentation Level 2 – SF65... -
Page 6: Accessories
Company Confidential Copyright 2005© Siemens AG 3. Accessories For SF65, the following accessories will be available. Description Part number Power Suppply EU with Service Packaging Material L36280-Z4-C404 Power Suppply UK with Service Packaging Material L36280-Z4-C405 Travel Charger EU ETC-500 L36880-N5601-A104... - Page 7 Company Confidential Copyright 2005© Siemens AG Page Service Repair Documentation Level 2 – SF65...
- Page 8 L60658-A157-A4 polar white LCD Module Assy with Earphone SF65 L50680-Q7360-M1 Flip Rearcase SF65 Polar White L60658-A157-A5 Screw 14X4 Torx Plus 6IP silver SF65 L50658-A157-A6 Hinge Body SF65 polar white L50658-A157-A7 Hinge Cover SF65 polar white L50658-A157-A8 Rotary Metal Hinge SF65...
-
Page 9: Disassembly Of Sf65
Company Confidential Copyright 2005© Siemens AG 5. Disassembly of SF65 Note: ESD concept; the internal circuits will be more susceptible to ESD during the housing exchange.The construction of the internal block is designed , in the best possible way, to protect the circuit against sparks. - Page 10 Upward from the strip. Remove the zoom key by lifting it upward Unscrew the four screws of the flip front case Page Service Repair Documentation Level 2 – SF65...
- Page 11 Unscrew the two screws of the LCD module assembly on the bottom side Unscrew the four screws of the mounting frame Release the antenna with connectors by pushing the antenna fixing fingers Page Service Repair Documentation Level 2 – SF65...
- Page 12 Remove the vibrator from the Mounting frame Place the hinge assembly tool into body Hold spring compressed in the hinge. When hinge´s hole, against the springhead and push the hinge is released, remove the hinge body it in Page Service Repair Documentation Level 2 – SF65...
- Page 13 Carefully pull out the flex (pay attention not to Direction of the flex cable : down to up damage it ) If necessary push with a plastic tool to release Removal of the flex cable the flex cable Page Service Repair Documentation Level 2 – SF65...
-
Page 14: Assembly Of Sf65
Company Confidential Copyright 2005© Siemens AG 6. Assembly of SF65 Place the Base Upper Case Shell on a flat Place the microphone with tweezers place Take a new keypad,remove the safety foil, Insert the flex cable into the base upper case... - Page 15 Clamp together the phone, press in the middle and then on the four corners to avoid breaking side buttons Place the camera gasket on the flashlight Clamp the antenna onto its place Page Service Repair Documentation Level 2 – SF65...
- Page 16 Bend in the flex to the hinge body anti-clockwise Thread in the flex, place the rotary hinge ( using tweezers) metal in such a way that it musn´t get to the side of the keypad with its arched surface Page Service Repair Documentation Level 2 – SF65...
- Page 17 Copyright 2005© Siemens AG Fix the rotary metal hinge with the two silver Connect the flexible PCB assembly to the screws (M1.4*4 screws silver SF65) LCD and fix it ( Check the connection Torque : 9 cNm carefully) Place the LCD module into the flip rearcase...
- Page 18 Place the upper part of the zoom key and then cornerwise) press hefty to fix it. (M1.4*4 Screws black SF65)Torque : 10 cNm Place the menu key and press strongly Turn the flip of the phone by 90° ( Take care not to break down the snapping...
-
Page 19: Imei Label Description
7) Barcode IMEI-No.: 8) IMEI-No. (plain writing) Explanation of Code of date Year Date Code Month Date Code 2003 January 2004 February 2005 March 2006 September 2007 October 2008 November 2009 December Page Service Repair Documentation Level 2 – SF65... -
Page 20: Water Indicator
Damage Caused by customer. Page Service Repair Documentation Level 2 – SF65...
Need help?
Do you have a question about the SF65 and is the answer not in the manual?
Questions and answers