Ryze ROBOMASTER TT Accessories User Manual
  1. Manuals
  2. Brands
  3. Ryze Manuals
  4. Drones
  5. ROBOMASTER TT
  6. Accessories user manual

Ryze ROBOMASTER TT Accessories User Manual

Mission pad and flight map
Hide thumbs Also See for ROBOMASTER TT:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

ROBOMASTER TT
Mission Pad and Flight Map User Guide
V1.0
2021.04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROBOMASTER TT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ryze ROBOMASTER TT

Summary of Contents for Ryze ROBOMASTER TT

  • Page 1 ROBOMASTER TT Mission Pad and Flight Map User Guide V1.0 2021.04...
  • Page 2 Introduction Mission pads and flight maps are accessories used for programming the RoboMaster TT (Tello Talent): The vision sensor of the drone detects the IDs of different mission pads and returns the relevant three- dimensional coordinates in order to execute the corresponding programming commands.
  • Page 3 Place the mission pad on a level surface and adjust the orientation of the rocket as needed. 2. Enable TT mission pad detection • Place TT in the center of the mission pad and enter the SDK mode (refer to the RoboMaster TT SDK instructions for details).
  • Page 4 -500 - 500 speed: 10-60 x, y, and z cannot be between -20 and 20 at the same time (x2,y2,z2) can be outside the recognizable range of the coordinate system © 2021 Ryze Tech. All Rights Reserved.
  • Page 5 -200 will be returned if the mission pad detection function is not enabled, and -100 if no pad is detected. • mpry: The pitch, yaw, and roll angles and degrees of the drone in the mission pad. If the mission pad is not detected, 0 will be returned. © 2021 Ryze Tech. All Rights Reserved.
  • Page 6 When using the mission pad, ensure that the ambient light is moderate. Too little or too much light will affect the recognition of the mission pad. When the forward-looking camera is used to detect the mission pad, the mission pad commands mentioned above cannot be used. © 2021 Ryze Tech. All Rights Reserved.
  • Page 7 During formation flight, do not have one drone to fly directly under another drone, as this may block the recognition of the flight map. When planning the formation flight path, you need to appropriately plan the routes of each drone to avoid collisions, which may cause explosions. © 2021 Ryze Tech. All Rights Reserved.
  • Page 8 This content is subject to change. Download the latest version from https://www.dji.com/robomaster-tt/downloads Copyright © 2021 Ryze Tech. All Rights Reserved.

Table of Contents