Cisco Spark Room Kit Quick Reference Manual

Cisco Touch Controller — Quick Reference Guide for Webex Enabled Room Devices
Place a Call From Contact List
1
Tap the green
Call button.
2
To search for
someone in
a specific list
(Favorites or
Recents), tap
that list and then
scroll down to
locate the entry
you want to call.
3
Tap that entry
to get the green
Call button. Then
tap the green
Call button, as
shown.
4
The call will now
be placed.
To end the call,
tap the red
End Call icon.
D1539105 February 2021
© 2021 Cisco Systems, Inc. All rights reserved.
Place a Call Using Name, Number, or Address
1
Tap the green
Call button.
2
Tap the Search
or Dial field.
This invokes the
keyboard.
3
Enter a name,
number or
address. Possible
matches and
suggestions
appear as you
type.
If the correct
match appears
in the list tap it,
and then tap the
green Call button.
4
Once you've
typed in the
number or
address, tap
the green
Call button to
place the call.
Share Content in a Call
1
Connect the
source to the
room device with
a suitable cable,
or go for wireless
sharing from the
Webex Teams
app. Make sure
the source has
been switched
on and tap
Share.
2
Tap Local
preview to view
the content
without sharing
it. Tap the X in
the upper right
corner, to return
to the previous
screen.
3
To discontinue
the preview, tap
Stop preview.
To share content
with the remote
participants, tap
Share in call.
4
To stop
sharing
content, tap
Stop Sharing,
as shown.
To share content locally (outside a call), just
tap the blue Share button (not shown).