Advertisement
Quick Links
Advertisement
Related Manuals for RadioLabs O2Connect
Summary of Contents for RadioLabs O2Connect
- Page 1 1 Installation Guide for RadioLabs USB Wifi Antennas/Adapters v. 071510...
- Page 2 2 PLEASE READ BEFORE ATTEMPTING INSTALLATION Thank you for purchasing a RadioLabs USB wireless networking product. This document will guide you through the steps to install the software or drivers necessary for your RadioLabs USB Wifi Antenna or Adapter on your Macintosh computer. These instructions are for: WaveRv ‐ Wireless Rv Solution (purchased after June 10 2009) Wave Magnum ‐ High Power USB Wifi O2Boost ‐ Directional USB Wifi Antenna The Seed – Plug and Go USB Wifi System WaveRv Marine ‐ Wireless Marine System (purchased after May 28 2009) O2Connect ‐ High Power Directional USB Panel (purchased after May 28 2009) This guide and the included software is not compatible with the WaveRV II Long Range USB Adapter, Please note that you will need a USB 2.0 port to utilize any of the RadioLabs USB Wifi Adapters/Antennas listed above. Installation Instructions for MAC Computers The MAC software included in this CD or .zip archive is compatible with the following versions of Windows: • OS 10.3 “Panther” (all revisions) • OS 10.4 “Tiger” (all revisions) • OS 10.5 “Leopard” (all revisions) • OS 10.6 “Snow Leopard” (all revisions as of 11‐09)* (MAC OS 10.6/Snow Leopard is not supported above revision 10.6.1) The screenshots included in this guide are from the MAC OS 10.4 version ...
- Page 3 3 Note: Do not insert the USB connector for your RadioLabs USB Wifi Antenna/Adapter into your MAC until prompted. Before installing your RadioLabs device, you will need to disable or disconnect any wireless devices currently operating on your PC. This includes the Airport, PCI adapters or external USB adapters. Your MAC does not need an Airport or built‐in wifi adapter to utilize any RadioLabs USB Wifi Antenna or Adapter. All of RadioLabs’ USB Wifi Antennas/Adapters have a built‐in wireless card that takes the place of your existing wireless network connection. If you are using a MAC that has an Airport integrated wifi connection, please use the Airport menu (top right of the screen) or System Preferences > Network to turn the Airport off. If you wish to use the Airport in the future, just use the Airport menu or Network icon under System Preferences to turn the Airport back on. ...
- Page 4 4 Select the installer for your OS from the menu in the RadioLabs Installation Wizard. This will begin the installation for your RadioLabs USB Wifi Adapter/Antenna. This step can be disregarded as long as you have not previously installed any software for your RadioLabs USB Wifi Antenna/Adapter. If you have attempted to install the software, please follow the instructions and uninstall the software using the “uninstall.command” and then start over from the beginning on this installation guide. ...
- Page 5 5 Please select License Agreement Langauge and click Continue Click Install to continue the installation. Enter the username (if necessary) and the system password to continue the installation ...
- Page 6 6 Select Continue Installation Select Restart to finish the installation and reboot your MAC Once your machine has restarted, you can connect the USB of your RadioLabs USB Wifi Adapter/Antenna connector to your MAC’s USB port. (If you have the Wave Magnum USB High Power USB Wifi Adapter, you will need to connect the small Mini‐B USB Connector end of the black USB cable to the Magnum and the other end to your MAC’s USB port.) Continue to the next page to configure your network preferences for your RadioLabs USB Wifi Adapter/Antenna ...
- Page 7 7 The instructions will now be differentiated depending on your OS version. When you connect the USB connector to your computer, you may see this alert, to continue, click okay. If alert does not appear, please continue to the next step. Go to System Preferences > Network. Select Location and click New Location and enter the Name of your new location. (For this instance, we have named the location “WaveMagnum”) and click OK Select the Show List and select the Ethernet Adapter (enX) [where x is a number your MAC assigns to the device] ...
- Page 8 8 Click Apply Now to activate your RadioLabs USB Wifi Adapter/Antenna Your RadioLabs USB Wifi Adapter or Antenna is now installed and ready to use. Please refer to the RadioLabs USB Device User Manual for instructions on how to use the RadioLabs Wireless USB Utility. ...