Advertisement
The Basic Instruction Card includes common instructions for optimal use of the
Ceiling Hoist. This is not a replacement for the user manual! Before use, please
read the manual carefully!
Charging
The Ceiling Hoist charges when the hand control is
placed in the wall charger.
1. Put the hand control in the wall charger.
2. Make sure that the charge indicator on the
Hand Control lights up green.
3. If the hoist is been activated, check the
control lightning of the Ceiling Hoist flashes.
Control lighting and sound signal.
The control lights show the status of the batteries and or they need
to be charged.
Green: batteries are
fully loaded.
© 2019, Patient Lifting Solutions, December 2019, v1.0
Basic Instruction Card
Orange: batteries
need to be charged.
Every 10 seconds a
beep.
AR-500
Red: the Ceiling Hoist
need to be charged
immediately! Every 1
second a beep. Spreader
Bar (lifting belt) can be
lowered.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PLS AR-500
Summary of Contents for PLS AR-500
- Page 1 Basic Instruction Card AR-500 The Basic Instruction Card includes common instructions for optimal use of the Ceiling Hoist. This is not a replacement for the user manual! Before use, please read the manual carefully! Charging The Ceiling Hoist charges when the hand control is placed in the wall charger.
- Page 2 Hand control Raise (Spreader Bar) Electrical Electrical Hanger Bar Hanger Bar to to reclined position seated position Lower (Spreader Bar) Ceiling Hoist on Ceiling Hoist off Battery charge indicator Before the lowering function starts to work, a weight, such as the Spreader Bar, should be hanged on the lifting belt.
Need help?
Do you have a question about the AR-500 and is the answer not in the manual?
Questions and answers