Related Manuals for Ross PS-8102
Summary of Contents for Ross PS-8102
- Page 1 Ross Video Limited DFR-8110A(-C) Digital Products Frame and Power Supply (PS-8102) User Manual...
- Page 2 The material in this manual is furnished for informational use only. It is subject to change without notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.
- Page 3 Important Regulatory and Safety Notices Before using this product and any associated equipment, refer to the “Important Safety Instructions” listed below to avoid personnel injury and to prevent product damage. Products may require specific equipment, and/or installation procedures to be carried out to satisfy certain regulatory compliance requirements.
- Page 4 Notice — Changes or modifications to this equipment not expressly approved by Ross Video Limited could void the user’s authority to operate this equipment. CANADA This Class “A” digital apparatus complies with Canadian ICES-003.
- Page 5 The crossed-out wheeled bin symbol invites you to use these systems. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You can also contact Ross Video for more information on the environmental performances of our products.
- Page 6 Company Address Ross Video Limited Ross Video Incorporated 8 John Street P.O. Box 880 Iroquois, Ontario Ogdensburg, New York Canada, K0E 1K0 USA 13669-0880 General Business Office: (+1) 613 • 652 • 4886 Fax: (+1) 613 • 652 • 4425 Technical Support: (+1) 613 •...
-
Page 7: Table Of Contents
Before You Begin ........................ 2-2 Static Discharge..................... 2-2 Unpacking......................2-2 Installing the DFR-8110A(-C)..................... 2-3 Mechanical Overview.................... 2-3 Power Supply (PS-8102) and Power Cable............2-3 Fault Reporting...................... 2-4 Improving Performance..................2-4 Ventilation and Cooling ..................2-4 Cabling for the DFR-8110A(-C)..................2-6 Cabling Overview.................... - Page 8 ii • Contents DFR-8110A(-C) User Manual (Iss. 03)
-
Page 9: Introduction
Congratulations on choosing the RossGear DFR-8110A(-C) Digital Products Frame and Power Supply. Your DFR-8110A(-C) is part of a full line of Digital Products within the RossGear Terminal Equipment family of products, backed by Ross Video's experience in engineering and design expertise since 1974. -
Page 10: Overview
(100-240 volts) with up to 80 Watts of module power. Of special note is that the PS-8102 has the ability to sustain a 100ms input voltage loss, or glitch, while maintaining a full power output. This is of great importance in areas where incoming power may not be clean. -
Page 11: Documentation Terms And Conventions
Documentation Terms and Conventions The following terms and conventions are used throughout this manual: • “Frame” refers to the DFR-8110A(-C) frames that house the cards. • “DFR-8110A” refers to the frame without the CFM-8110A Cooling Fan Module. • “DFR-8110A-C” refers to the frame with the CFM-8110A Cooling Fan Module. •... - Page 12 1–4 • Introduction DFR-8110A(-C) User Manual (Iss. 03)
-
Page 13: Installation
Installation In This Chapter This chapter provides instructions for installing the DFR-8110A(-C), and cabling details. The following topics are discussed: • Before You Begin • Installing the DFR-8110A(-C) • Cabling for the DFR-8110A(-C) DFR-8110A(-C) User Manual (Iss. 03) Installation • 2–1... -
Page 14: Before You Begin
Unpacking Unpack each DFR-8110A(-C) you received from the shipping container and ensure that all items are included. If any items are missing or damaged, contact your sales representative or Ross Video directly. 2–2 • Installation... -
Page 15: Installing The Dfr-8110A(-C)
Of great importance to the user who may have unstable or unpredictable facility power, is the ability of the PS-8102 to withstand input power glitches of up to 100ms in length, while still providing uninterrupted power to the modules in the frame. This is an essential feature for applications such as program feeds, live event feeds, or wherever a robust signal system is required. -
Page 16: Fault Reporting
CFM-8110A Cooling Fan Module in a DFR-8110A, field upgrade option. When the Cooling Fan Module is installed, the frame and PS-8102 can supply up to 80 Watts of module power. Under these ventilated conditions, there is no requirement for extra spacing between the frames. The DFR-8110A-C (or DFR-8110A with CFM-8110A option) can be stacked one on top of the other, a feature that is highly desirable in densely crowded rack frame environments. - Page 17 Notice — For reliable performance, it is recommended that the frame door not be opened for longer than 5 minutes when using the Cooling Fan Module option, on frames loaded with more than 40 Watts. Figure 2.1 Frame Stacking — CFM-8110A Not Installed Figure 2.2 Frame Stacking —...
-
Page 18: Cabling For The Dfr-8110A(-C)
Cabling for the DFR-8110A(-C) This section provides information for connecting cables to the DFR-8110A(-C). Cabling Overview The frame BNC connectors have been marked as inputs and outputs. In some cases, the connectors will have been assigned a different function. Consult the installation section of each module, or BNC designations screened on the card, for a translation table, if required. - Page 19 Reserved for future use. Reference Connector This feature, developed and brought to market by Ross Video, uses a BNC connector to input an external master frame REF signal that is distributed across the back plane to all modules. Typically analog black video is used. Some cards, which need an external reference, can use this “master”...
- Page 20 2–8 • Installation DFR-8110A(-C) User Manual (Iss. 03)
-
Page 21: Optional Field Upgrade Kits
Optional Field Upgrade Kits In This Chapter This chapter contains the following sections: • CFM-8110A Cooling Fan Overview • CRB-8110A Card Retaining Bracket • Support Bars and Brackets DFR-8110A(-C) User Manual (Iss. 03) Optional Field Upgrade Kits • 3–1... -
Page 22: Cfm-8110A Cooling Fan Overview
CFM-8110A Cooling Fan Overview The standard equipment, DFR-8110A, can be also be ordered as the DFR-8110A-C version, with the Cooling Fan Module installed as original equipment from the factory. However, for customers wishing to increase the ventilation on their standard DFR-8110A frames, the optional CFM-8110A Cooling Fan Module is available as a field upgrade kit Power Carrier Board Frame Motherboard... -
Page 23: Crb-8110A Card Retaining Bracket
CRB-8110A Card Retaining Bracket The CRB-8100A (8110A-312) is useful in mobile applications to prevent frame movement from un-seating the modules. It may be installed in both the DFR-8110A and the DFR-8110A-C. Installing the CRB-8110A Use the following procedure to install the CRB-8100A: 1. -
Page 24: Support Bars And Brackets
However, Ross Video has specifically engineered the optional FSB-7110 Rear Support Bars and Brackets to compensate for extra load stress associated with certain applications, such as mobile truck installations, to also support the rear of the frame The rear support bars can be attached to the DFR-8110A(-C) in six possible positions. -
Page 25: Specifications
Specifications In This Chapter This chapter provides the technical specification information for the DFR-8110A(-C). The following topics are discussed: • Technical Specifications DFR-8110A(-C) User Manual (Iss. 03) Specifications • 4–1... -
Page 26: Technical Specifications
The sum of both outputs not to exceed 13A. Line Regulation change-over full <+/-250mV input range Output Ripple <60mV p-p (1.8%) For safety reasons, Ross Video power supplies do not fit into rack frames of other manufacturers. Height 3.5" (90mm) Width 19" (483mm) Rack Frame... -
Page 27: Service Information
Service Information In This Chapter This chapter contains the following sections: • Troubleshooting Checklist • Warranty and Repair Policy DFR-8110A(-C) User Manual (Iss. 03) Service Information • 5–1... -
Page 28: Troubleshooting Checklist
Troubleshooting Checklist Routine maintenance to this RossGear product is not required. In the event of problems with your DFR-8110A(-C), the following basic troubleshooting checklist may help identify the source of the problem. If the frame still does not appear to be working properly after checking all possible causes, please contact your RossGear products distributor, or the Technical Support department at the numbers listed under the “Contact Us”... -
Page 29: Warranty And Repair Policy
In the event that your RossGear DFR-8110A(-C) proves to be defective in any way during this warranty period, Ross Video Limited reserves the right to repair or replace this piece of equipment with a unit of equal or superior performance characteristics. - Page 30 Notes:...
- Page 31 Notes:...
- Page 32 P.O. Box 880, Ross Video Incorporated Ogdensburg, New York, USA 13669-0880 Visit Us Please visit us at our website for: • Company information • Related products and full product lines • On-line catalog • News • Testimonials Ross Part Number: 8110ADR-004-03...
Need help?
Do you have a question about the PS-8102 and is the answer not in the manual?
Questions and answers