Samsung HW-A650 Full Manual page 50

NOTES
• If you use a device that uses the same frequency (5.8GHz) as
the Sound bar near the Soundbar, interference may cause some
sound interruption.
• The maximum transmission distance of the main unit's wireless
signal is about 32.8 ft (10 m), but may vary depending on your
operating environment.
04
CONNECTING WITH A
CABLE
• o----•--
Optical Cable
HDMI Cable (not supplied)
■---1
C
Bottom of the Sound bar
TV/BD/
DVD player/ Set-top
box/ Game console
■-fi-1
I
TV Bottom of the Sound bar
External Device
■-fi­
• -fi--
TV Bottom of the Soundbar
NOTES
D.IN
mode
TVARC
mode
HDMI
mode
• If TV sound is inaudible, press the
<g]
(Source) button on the
remote control or on the top of the Sound bar to switch to
"D.IN"
mode. The screen displays "D.IN" and "TV ARC" in sequence, and
TV sound is played.
• The recommended cable is High Speed HDMI Cable with
Ethernet.
• When you use an optical cable and the terminals have covers, be
sure to remove the covers.
05 CONNECTING WIRELESS LY
Connecting a TV or Bluetooth Device via
Bluetooth
Top of the Sound bar
OR
.. *··
OR
D
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can search for previously
connected TVs or connect a previously connected mobile device
to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to
the Sound bar. (Press the * PAIR button on the remote control
or press and hold the
<g]
(Source) button on the top of the
Soundbar for more than 5 seconds while the Sound bar is in "BT"
mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
Bluetooth Multi connection
The Sound bar can be connected to 2 Bluetooth devices at the same
time.
Bluetooth device A Bluetooth device B
• Play music from one of the connected Bluetooth devices while
two devices are connected.