Download Print this page

DAM 180 Assembly

assembly

180

code / st008

Table of Contents

Need help?

Do you have a question about the 180 and is the answer not in the manual?

Page 1 assembly code / st008...
Page 2 description contents 1 x steel shelf (Part A) Wall-mounted steel shelf. 2 x nail-in screws with wall plugs 2 x plastic cover caps install ation The fixing provided are to be used for to install, you will need installation onto a brick or plaster wall. Consult your hardwear supplier for advice on suitable fixings to be used for installation 1 x Pozidriv (SupaDriv) PZ screwdriver...
Page 3 how to install this product step 1 step 2 step 3 step 4 Position the shelf against the wall. Use a Drill out both holes where marked using a 1. Align shelf with the holes in the wall. Cover the screw heads with the plastic spirit level to ensure that it is level.
Page 4 thank you for recycling Please support responsible environmental management by recycling product packaging. we really do care We make each product with great care and attention to detail. If you experience any problems with this product, please let us know. We are always working to improve on our products.