Db9 Female Front Side View - NARDA L3Harris AMB-8059 User Manual

Multi-band emf area monitor
Table of Contents

Advertisement

1.8.7.1 8059-Optical link
To install the fiber optic
link, remove the rubber
cap (on the right side of the
picture) and insert the fiber
optic cable in the hole; the
cable is equipped with its
special waterproof cap.
Detail of Solar Panel module:
• Data-Supply connector for connection to the monitoring station.
• USB connector and its dust cap for direct connection to Personal
Computer and for battery charger.
• Ethernet connector and its dust cap for direct connection to
Personal Computer.
• RS232 connector for direct connection to Personal Computer.
Fig. 1-20 DB9 Female front side view
DB9 Female Connector pin configuration:
Pin 2 RX [Received Data]
Pin 3 TX [Transmit Data]
Pin 5 GND [Signal Ground]
Pin 9 +3VD [Current limited]
• MAC Address label reports the physical address assigned to the
module for Ethernet/LAN connection.
AMB-8059/01 and AMB-8059/03 can be controlled via an optional fiber
optic cable, as depicted below. Inside the Solar Panel waterproof box, an
optical port is already prepared for this purpose.
General Information
1-29

Advertisement

Table of Contents
loading

Table of Contents