Related Manuals for Pequod Borea Sub 13.1
Summary of Contents for Pequod Borea Sub 13.1
- Page 1 Borea Sub 13.1 12” Acoustic suspension subwoofer User guide Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 2 Borea Sub 13.1 12” Acoustic suspension subwoofer Index 1 Technical Specifications 2 Unpacking and Checking 3 Cables and Set-up 4 Installation and System Design 5 Accessories 6 Maintenance and Surface Protection 7 Warranty 8 Authenticity Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com...
-
Page 3: Construction Materials
13.1 guarantees the perfect loading of low frequencies in sensitivity, depth, control and SPL expressed by the usa- ge of few watts. Borea Sub 13.1 uses a single high quality , high excursion transducer of 12“diameter. The structu- re is rigid and very light (considering the overall weight and the dB/Kg ratio). - Page 4 2: Unboxing USER GUIDE The Borea system, like every other Pequod pro- duct, is built with high standards of control and quality. At the end of the production process and before packaging, each system is tested: acou- stically measured and recorded in our company database.
- Page 5 +1 red and -1 black on the amplifier, + 2 / -2 empty) to connect to the Borea input, which has an NL4 female connector, standard or WP on request. Borea Ampli + DSP ( +1 -1 on ampli exit ) NL4FC NL4FC Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 6 (+ 1 / -1 connected + 2 / -2 empty). Sections of poles: section 2.5 mmq per pole and cable len- gth of about 1.5 m Parallel Connection Borea NL4FC Borea NL4FC NL4FC NL4FC Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 7 The figure shows the typical combination, with Kona, Zephyrus and Ostro. Kona + Borea Zephyrus + Borea Ostro + Borea Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 8 (wall position) or in a corner position, to avoid harmful (for the purposes of emission re- gularity) reflections of acoustic waves and incre- ase the overall performance of the system. Corner Position Wall Position Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 9 M6, screwed between the floor and the threaded insert M6, placed in each foot of the product. x2 screws ,M8 Base Floor x2 screws ,M8 Pequod Acoustics Srl. Via del Madonnone 25, Florence, Italy www.pequodacoustics.com info@pequodacoustics.com...
- Page 10 5: Accessories USER GUIDE In the Pequod catalog there are some accessories to be used with Borea. Water proof bag Cod. BAG01BO: Protective PVC Bag sized for Bo- Cod. BAG01BO rea, waterproof soft finish to protect from scratches and weather Cod.
- Page 11 6: Maintenance and Surface Protection USER GUIDE All Pequod units are built from a unique high quality composite material which is inert to at- mospheric agents and requires minimal regular maintenance, just a simple cleaning of the sur- faces with a soft cloth dampened with alcohol.
- Page 12 The damaged product has been subject to misu- If the repairs made by Pequod or a Pequod Authori- se, accident, neglect or failure to comply with normal sed Service Centre are not satisfactory to the owner, maintenance procedures they are instructed to give written notice to Pequod.
- Page 13 When warranty claims are made, or other reque- sts that require authentication of an individual Pequod product, we will ask the owner to pro- vide a description of the identifying marker as further proof of originality.