Table of Contents INTRODUCTION BASIC ROOT WASHER OPTIONAL TANK OPTIONAL PUMP WARNINGS BASIC ROOT WASHER ASSEMBLY HOSES AND CONNECTIONS BUCKET, TABLE AND NOZZLES PUMP AND TANK INSTALLATION PUMP ELECTRICAL SAFETY INSTALLATION HOW TO USE THE ROOT WASHER HOW IT WORKS STEP BY STEP SPECIFICATIONS, PARTS AND ACCESSORIES Basic Root Washer System : type RWB...
Page 5
SERVICING, WARRANTY AND REPAIRS Replacement parts. Servicing the Pump WARRANTY SERVICE...
The Delta-T Root Washer has evolved from a design used by CSIRO Cunningham Laboratory in Brisbane, Australia. This was modified by Kirchhof & Pendar (authors of the Delta-T SCAN image analysis software) who produced designs for a do-it-yourself kit published in the Delta-T SCAN User Manual.
WARNINGS PERSONNEL PROTECTIVE EQUIPMENT Non-slip footwear and waterproof clothing are recommended, particularly in colder climates. Protective eyewear is not normally required, but there is some water spray from the buckets when the root washer is first connected to the water supply.
UNPACKING Carefully remove all packing material and keep it safe so that it can be re-used to transport the system in the future. Using the packing list(s), make sure that the consignment is complete. Identify each component using the parts lists and drawings in this manual. Check for damage.
HOSES AND CONNECTIONS HOSE AND CONNECTORS List of parts 1. Tap connnectors : 22mm , 3/4", 1/2", 5/8" (x1) 7. 4-way tap connector (x1) 2. Push-fit hose connectors (x8) 8. 0.5M of 12.5mm dia hose (x4) 3. 20M of 12.5mm dia hose (x1) 9.
PUMP The root washer stands in the centre of the tank with the pump underneath. The pump stands in the water and draws it through its base filter, up through the body and out at the top. It is designed so that is does not require any priming but it must not be allowed to run dry for many minutes.
HOW TO USE THE ROOT WASHER HOW IT WORKS The Delta-T Root Washer comprises 4 buckets modified with a central overflow downpipe. Water from two jets at the base of each bucket swirls around and up, teasing roots and soil apart. The lighter roots float up with the water flow, into the central overflow pipe, and are then caught in a 550 micron mesh filter in a funnel under the table.
Page 14
10.Pour the remaining water and roots into the funnel, leaving any remaining stones and sediment in the bucket. 11.Empty the stones and sediment out of the bucket. Do not pour this debris into the funnel or the recirculation tank. 12.Remove the roots from the filter and store them safely in one of the containers provided.
SPECIFICATIONS, PARTS AND ACCESSORIES Basic Root Washer System : type RWB Includes 4 buckets each with 2 water jets, table, funnels with filters, pistol-type spray gun, water hoses and connectors, isolation valves, 30m of ½ inch (12.5 mm) input hose, plastic containers for holding washed samples, and a consumables kit.
the mains and frequency. Further details about the pump and tank are given overleaf. Optional Extras and Accessories Water Tank : type RWT This is a shallow, cylindrical, open topped, UV-protected, polypropylene tank, diameter 4 ft (1.22 m), height 14 inches (35 mm). The Basic Root Washer stands in it from which it catches the dirty water, which can either be recycled using the pump, or drained away via an overflow pipe with tap and 5 m of ½...
Page 17
The only component requiring regular servicing is the optional water pump, which has been chosen because it is designed to work or long periods of time in dirty water. Delta-T offer an optional spares kit, type SKP, which includes those parts which may need replacing after many hours of service.
Page 18
They will have to be returned to the original manufacturer for servicing, and may be subject to additional delays. Users in countries which have a Delta-T Representative should contact them first. ____________________________________________Page 13...
Need help?
Do you have a question about the RWC-UM-2 and is the answer not in the manual?
Questions and answers