EasyStand Evolv Perfect Fit Manual

Perfect it Guide
Proper positioning is needed to achieve optimum standing posture.
step one - measure
Before transfering into the stander,
measure for approximate seat depth
(A) and seat to footplate (B) settings.
Use these measurements to adjust
the seat depth and footplate height
on the stander.
step two - seat depth
To adjust seat depth, loosen
the knob under the seat (C).
Depress the snap button on the
adjustment tube while moving the
back (D). Tighten the knob after
adjusting.
step three - back angle
After achieving your desired seat
depth, rotate the back angle
adjustment knob (E) so the
increment indicator (F) is
in the green (safe) area.
www.easystand.com
™
(A)
(C)
(E)
over . . .
800•342•8968
™
(B)
(D)
(F)