Device Setting - CONCORD XC6010 Instructions For Use And Care Manual

4.3.1 Device setting

WiFi and Ethernet details can be found under the Network section.
Sound: Set the sound of the system.
If you want to connect the TV box with your audio devices through SPDIF port,
please set up the audio output first by go to setting-device setting-advanced
setting-Sound-Dolby sound-RF and digital sound-SPDIF Raw
App: When selecting App, you will be able to view all Apps preloaded onto the
box. Select the required App, and then you can either open it, force stop or unistall
the App.
Screen Saver: Go to App Drawer and select "BurnKeyTool" App. Once a key is
successfully burnt, reboot your device.
About: In this section, all information pertaining to your TV box can be found.