Table of Contents
Advertisement
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization –
4. Troubleshooting
Check the Display Manager work normally.
Display Manager program Re-
2
Check the Control pan
Check HDMI section enable.
3
4
Replace Main Board.
#8. The HDD is not recognized.
Check the connection status of the HDD
connector.
(Refer
Disassembly
Chapter.)
1
If the 'Operating system not found'
message a
ppears during th
even though the HDD is recognized by CMOS,
the operating system of the HDD may be
corrupted or the HDD is out of order.
2
#9. Touch Pad do
es not wor
Check the c
onnection
FFC.
1
Check the connection status of Touch Pad
2
cable
Check the connection status of Touch Pad I/F
3
B'D.
Check the connection status of To
4
Module.
Replace Touch-Pad Module.
5
#10. Camera does not work normally.
X460
install.
el .
and
Reassembly
e booting process
k normally.
status of Touch Pad
uch Pad
*Check if it is out of order.
Format the HDD and reinstall the operating
System.
Replace the HDD with a new one.
Fn + F4
4 - 16
Advertisement
Table of Contents
Troubleshooting
