AmazonBasics B06X9NQ8GX Instructions For Use Manual page 8

EN
8
6. If weighing liquid, press
view volume.
Volume mode
1. Place scale on a flat, solid surface.
2. Press
3. When the LCD screen shows "0", press
UNIT
4. Place container for liquid on top of scale.
5. Press
6. Pour liquid into container. Volume of liquid
will be shown on the display.
7. To view the weight of the liquid, press
Pour in liquid
to select weight mode.
UNIT
NOTICE
The volume of actual liquid may be
different than what isdisplayed because the density of
liquid is not always equivalentto 1g/cm
"Tare" function
The Tare function allows you to measure
items as they are added to the scale to get
separate and total weight of items.
1. Place first item(s) to weigh on the scale
and get weight.
2. Without removing item(s), press
reset the LCD reading to "0".
3. Add the next item (s). The display will show the weight
of that item.
4. You can repeat this sequence until you are done
weighing items.
to select volume mode to
to turn on scale.
to choose mode.
to reset the LCD screen to "0".
.
3
to