GNC DayLight Manual page 23

ENG
DAY SETUP MENU
Using keys to increase (+) and decrease (-), set the intensity of the cold white LED chan-
nel that you want to have in the phase of the day
Using keys to increase (+) and decrease (-), set the intensity of the pre-mixed red LED
channel that you want to have in the phase of the day
Using keys to increase (+) and decrease (-), set the intensity of the hot white LED chan-
nel that you want to have in the phase of the day
Set hours and minutes of the sunrise start time using keys to increase (+) and de-
crease (-)
Set the duration of the sunrise ramp in minutes, using keys to increase (+) and de-
crease (-)
Three optional sets to set changes in brightness levels at three different times during
the day
Activate any set using the on / off switch.
A drop-down menu for the settings will be proposed
Set hours and minutes of the start time of the set using keys to increase (+) and de-
crease (-)
Using keys to increase (+) and decrease (-), set the intensity of the cold white LED chan-
nel that you want to have in the phase of this set
Using keys to increase (+) and decrease (-), set the intensity of the pre-mixed red LED
channel that you want to have in the phase of the day
Using keys to increase (+) and decrease (-), set the intensity of the hot white LED chan-
nel that you want to have in the phase of this set
Possibility to independently set two further brightness sets.
Each set is optional and independent of the others
Press save icon to store entered data