Toshiba KK-1600 Service Manual page 21

[F] AC adapter
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Detach AC adapter jack from STP controller
PWA (J1).
4. Detach power cord and remove AC adapter.
[G] STP LED PWA
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Remove AC adapter. (See Fig. 6-13)
4. Detach one connector from STP controller PWA
(J5) and release 2 clamps.
5. Remove one screw and remove STP LED PWA.
[H] STP base stay assembly
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Detach AC adapter jack and the connectors from
STP controller PWA (J1/J2/J5).
4. Release 4 clamps.
KK-1600 DISASSEMBLY AND REPLACEMENT
Power cord
STP controller PWA
connector
J5
STP controller PWA
6 - 4
AC adapter
AC adapter jack
Fig. 6-13
Fig. 6-14
Screw
STP LED PWA
Fig. 6-15
J2
J1
J5
AC adapter jack
Fig. 6-16
October 2000 © TOSHIBA TEC
322-1
clamp
322-2
322-3
323