Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Addmaster is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.
Operation of the printer in other environmental conditions or uses is not supported. • The IJ-7100 is shipped with and requires the use of a UL approved power supply. Use the printer only with the provided power supply. •...
The IJ-7100 Ink-Jet Transaction Printer is a modern, high-reliability transaction printer designed for use in financial, POS and other applications. The IJ-7100 prints on 3 inch wide journal or receipt paper, as well as inserted documents which may be of any size. The printer uses the Hewlett-Packard C6602A Ink-Jet cartridge.
See the corporate website for information. 1.2 Emulations and Printer Models The model number IJ-7100 as used in this document is used in a generic sense. When optional emulations and hardware elements are added the exact model number changes. Consult the table for the current listing of models.
IJ-7100 User’s Guide 1.3 Supplies and Ordering Information The IJ-7100 printer is designed and tested to work with certain supplies and consumables. Use with other supplies or consumables is not tested nor supported. Consult Section 5 for specification of the approved supplies.
Addmaster Corporation IJ-7100 User’s Guide Installation When installing the IJ-7100 printer, please follow the steps outlined in this section. Some steps may not be required in your application. Please read through the entire chapter once before beginning the installation process.
IJ-7100 User’s Guide 2.3 Cabling: Power / Communications Please assure that the power switch is OFF before continuing. Then cable the IJ-7100 printer in the following order: 1. Plug in the data communications cable. Attach also to proper computer port.
Addmaster Corporation IJ-7100 User’s Guide 2.5 Peripherals Not applicable for this model. 2.6 Ink-Cartridge Installation of the ink-cartridge is described in the Section 3.2. In addition, please follow any information supplied with the ink-cartridge itself describing the removal of any protective shipping elements.
IJ-7100 User’s Guide Printer Operation The IJ-7100 Printer is simple to operate. Controls and indicators are very intuitive and easy to use. Supplies and consumables are easy to load and remove. New users can typically be trained in a minimum of time, and only the topics presented in this section need to be covered.
Addmaster Corporation IJ-7100 User’s Guide 3.1 Operator Controls Item Usage Power Switch. Cuts power to the printer. ALWAYS USE THE POWER SWITCH TO REMOVE POWER. Paper-Feed Feeds paper forwards. Button. Short depression: Feeds last printed line past tear-bar (about 2 ‘2’...
Addmaster Corporation IJ-7100 User’s Guide 3.2 Indicators Indicator State Meaning Ready LED. Power is ON. Printer is On-Line and ready to operate. FLASH N/A. Power is OFF or Printer is not Ready because of paper loading error. Error LED. FLASH Error: one of the following Out-Of-Paper.
Addmaster Corporation IJ-7100 User’s Guide 3.2 Loading Ink-Cartridges Follow these steps when loading Ink-Jet Cartridges. 1. Be sure you have obtained the proper replacement ink-cartridge. 2. Open the new ink-cartridge. Follow any instructions packed with the cartridge. 3. Remove the printer’s access lid. The lid lifts upwards.
Addmaster Corporation IJ-7100 User’s Guide 3.3 Loading Paper Before installing a new roll of paper the remains of the old roll must be completely removed. Use the paper feed button to feed out the paper and then remove manually. Step #1: Preparation.
Addmaster Corporation IJ-7100 User’s Guide Step #3: Finish. Close the lid. Tear off the excess paper using the Tear-Bar. Test the printer by printing the Printer Status Info report. (Hold down the Go Button until printing begins.) 3.4 Self-Test Procedure After the printer is set-up and its supplies are loaded, its operation can be tested by use of the printer’s “Self-Test Routine.”...
Addmaster Corporation IJ-7100 User’s Guide Troubleshooting, Maintenance & Repair 4.1 Troubleshooting Problems Consult the proper sub-section below for information on solving the symptom. Flashing Error LED Indicator A flashing Error LED indicator informs the operator that one of these 2 conditions is preventing the printer from continuing operation: •...
Page 18
Addmaster Corporation IJ-7100 User’s Guide Irregular Paper Feed If the paper fails to properly feed into the unit, check the following: • The paper being fed into the unit has a straight edge with no bends, • The paper roll can rotate freely on its supports.
Setup your computer. 4.2 Maintenance The IJ-7100 is designed for use without preventative maintenance. However, print quality may suffer in environments which are very dusty, dirty, or humid. In these environments, we recommend the following: T.B.D. No recommendation at this time.
If the unit is to be sent to the factory for maintenance or repair, you must first obtain an “RMA” number from the factory. Contact Addmaster at the location given in Section 1.3. IMPORTANT NOTES: When shipping your IJ-7100 •...
Addmaster Corporation IJ-7100 User’s Guide Supplies & Consumables 5.1 Supplies & Consumables Specifications Paper Roll Specification Media Type Plain paper. Roll stock. Roll Diameter 3.0 inches maximum Roll Width 3.00 inches (+0.1/-0.2) Roll Core I.D. 5/8 inches typical, (no special requirement) Thickness 0.0015 to 0.03 inches...
Addmaster Corporation IJ-7100 User’s Guide Abbreviated Technical Data 6.1 Printer Operation & Features Consult IJ-7100 Specification for current technical data. 6.2 Printer Dimensions and Space Requirements T.B.D. Figure 6.1 Outline Dimensions: Side View Notes: • All dimensions are in inches.
Need help?
Do you have a question about the IJ-7100 and is the answer not in the manual?
Questions and answers