Nokia RM-383 Service Manual page 11

7. Use a TORX T5 screwdriver to loosen and remove two
TORX T5 screws (M1.6_3.0*4.3mm). When using torque
driver, set torque to 1.2+/- 0.1kgf @ 400+/-50 rpm.
9. Lift the D-cover Up & remove it.
11. Lift and remove the Camera holder off with
tweezers.
Page 11 (23) Confidential
Copyright © 2009 NOKIA. All rights reserved.
Service Manual Level 1&2
8. Use a TORX T5 screwdriver to loosen and remove
four TORX T5 screws (M1.6_3.0*4.3mm). When using
torque driver, set torque to 1.2+/- 0.1kgf @ 400+/-50
rpm.
10. Lift and remove the Camera Flash FPC cable off with
tweezers.
12. Lift and remove the B2B connector off with
tweezers.
7208 RM-383
Issue1