RNIB DK89 Instructions

Talking measuring jug

Advertisement

Talking Measuring Jug
DK89
Please retain these instructions for future reference. These instructions are also
available in other formats.

General description

This talking measuring jug announces the measurements in imperial or metric in a
natural male English voice. The contents being measured are spoken either
automatically when poured into the jug or you can press a button for an
announcement. You can also convert readings between imperial and metric.

Orientation

The main unit is a solid plastic mould which incorporates the carry handle, the base for
the plastic jug, and the function buttons. The removable plastic jug is attached to the
base by placing it in position with the lip facing away from the unit and then clipping it
in place.
There are four operating buttons on the unit. The Speak button is located on top of the
handle and three further buttons are positioned on the side of the unit, with the handle
facing towards the right. From top to bottom these are: Zero, Units and Liquid. These
are now described in detail as follows:
Speak button: Press this button to hear the announcement of a measurement.
However, the unit will automatically speak the measurement when a liquid is poured
into the jug. If no button has been pressed within the previous 30 seconds the jug will
indicate the liquid being measured followed by the amount, otherwise only the amount
will be spoken.
Zero button: Used to reset the measurement to zero. This can be done when
measuring multiple ingredients. For example, if you have a recipe which requires you
to add a specific amount of milk to a cake mix then you could add the mix to the jug,
press Zero then measure the milk while adding it to the mix. This is known as a Tare
function.
Please note: The jug cannot read less than zero, so if you press the Zero button and
remove some of the contents it will continue to say "zero". If you have used the Tare
function it is important to remember before taking new measurements to press the
Zero button again with the jug empty.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DK89 and is the answer not in the manual?

Questions and answers

Summary of Contents for RNIB DK89

  • Page 1 Talking Measuring Jug DK89 Please retain these instructions for future reference. These instructions are also available in other formats. General description This talking measuring jug announces the measurements in imperial or metric in a natural male English voice. The contents being measured are spoken either automatically when poured into the jug or you can press a button for an announcement.
  • Page 2 Fit the battery into the compartment and then replace the cover. A replacement, alkaline PP3 battery is available from RNIB under product code CP17. Please note: RNIB does not guarantee batteries. Using the product Please be aware that the most accurate readings will be obtained with the base standing on a level worktop and that lifting it will degrade the accuracy.
  • Page 3 However, the jug can be used to measure while being hand held - under a tap for instance. As the contents increase the reading will be spoken or can be requested at any time by pressing the Speak button. The more the jug is tilted the less accurate its readings will be - it may even say “Zero”...
  • Page 4 If you have any issues with the product and you did not purchase directly from RNIB then please contact your retailer in the first instance. For all returns and repairs contact RNIB first to get a returns authorisation number to help us deal efficiently with your product return.
  • Page 5 © RNIB...

Table of Contents