Table of Contents
Advertisement
Quick Links
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines,
This equipment should be installed and operated with minimum distance between 20cm the radiator your body:
Use only the supplied antenna.
FCC ID:2ATPO-A9G
Copyright©2019
ShenzhenAi-ThinkerCo.,LtdAllRightsReserved
Advertisement
Table of Contents
Summary of Contents for Ai-Thinker A9G
- Page 1 A9G GPRS/GSM+GPS/BDS MODULE V1.4 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 2 A9G development board slot machine expansion board, which can be connected to traditional slot machines. Based on the above functions, A9G can be used for a variety of peripheral prototype development and verification: l Vehicle anti-theft device using GPRS + GPS and acceleration sensor.
- Page 3 - Low power mode, average current 2mA or less developing GNSS applications. -supportGPS,BDS. T he A9G can be used in a wide range of IoT - Supports digital audio and analog audio, supports applications and is ideal for IoT applications for home...
- Page 4 A9G GPRS/GSM+GPS/BDS MODULE V1.4 Product specifications Model Name Package SMD54 Size 19.2*18.8*2.7(±0.2)mm Frenquency 850/900/1800/1900MHz GPRS Multi-slot Class 12 GPRS Mobile Station Class B Class 4 (2W@850/ 900MHz) Compatible with GSM Phase 2/2+ Class 1 (1W@1800/1900MHz) Power supply 3.8~4.2Vtypicalvalue4.0V 1.14mA@DRX=5 Current 1.03mA@DRX=9...
- Page 5 If not, a second label must be placed on the outside of the final device that contains the following text: “Contains FCC ID: 2ATPO-A9G ”...
- Page 6 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Information for the OEMs and Integrators about antennas The EUT is a mobile device;...
Need help?
Do you have a question about the A9G and is the answer not in the manual?
Questions and answers