LCTRT7135, LCTRT9543, LCTRT12047
STEP 1: Insert (3) Cam Pins (F) into each Leg (C). Two
go on the inside, and one on the outside.
F
C
Outside of LEG (C)
STEP 3: Attach Supports (D) to outside of both
Legs (C) by lining up the Cam Pin (F) with the Cam
Lock on Support (D). Drop into place and tighten
Cam Locks as shown in Figure 1.
C
PG.2
Legacy Racetrack Conference Table
Inside of LEG (C)
F
C
D
STEP 2: Attach Stringer (B) to Legs (C) by lining up
Cam Pins (F) with Cam Locks on Stringer (B). Secure
into place and tighten Cam Locks as shown in Figure 1.
C
STEP 4: Place both Table Tops (A) face down on
a clean, carpeted surface and insert (4) Cam Pins
(F) into each Top (A). Please note: pre-drilled hole
locations for pins vary by model.
PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email customerservice@regencyof.com
www.regencyof.com
F
B
F
C
A
C