Advertisement
Quick Links
DMX PROJECTOR
SHUTTER
Instruction Manual
Models:
DMX SHUTTER-3
DMX SHUTTER-5
version 1.0 since 3 February 2020
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
DMX_SHUTT_en_manual_M267
( 1 / 8)
Advertisement
Related Manuals for SRS Lighting DMX SHUTTER-3
Summary of Contents for SRS Lighting DMX SHUTTER-3
- Page 1 DMX PROJECTOR SHUTTER Instruction Manual Models: DMX SHUTTER-3 DMX SHUTTER-5 version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
-
Page 2: Important Instructions
General information IMPORTANT INSTRUCTIONS All safety and operating instructions should be read before the equipment is installed or operated. IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. - Page 3 The DMX Projector SHUTTER /dowser is a small device that is used to make a true blackout in the projection area. It can be used with all types of projectors. This device is controlled via the DMX signal, USB port of a computer or using a manual switch with 3- or 5-pin DMX cable.
- Page 4 Front panel description: 1. DMX input 2. DMX output 3. DMX start address switch (UP = ON) Switch #10 is a MIRROR switch that inverts the zero position of flap: DMX512 = zero position, DMX0 = 90 deg. 4. LED indication of DMX and power Rear panel description: 1.
- Page 5 DMX signal controlled projector shutter: When power adaptor and the DMX line have been connected, the projector shutter is ready for use. By changing the percentage of the chosen DMX address, the motor axle can be turned forward and backward according to the DMX percentage. The motor axle can turn from 0 to 90 degrees, 0% meaning 0 degrees and 100% being 90 degrees.
- Page 6 Address field: x- single digit software sends command only to X DMX start address x,x multiple digits software sends command to all DMX addresses separated by comma a sign Value field: Specifies the DMX value sent to desired channels: 0-255 ( 6 / 8)
- Page 7 Firmware update: Select the firmware file and click OPEN Warranty: The product design should be varied to keep the product continuously updated. The product price should be subject to possible variations for eventual rises of production costs or duties. Claims for possible damages during the freight must be notified to the carrier. All claims must be notified to the distributor or manufacturer within 8 days from the receipt of goods.
-
Page 8: Declaration Of Conformity
Name of producer: SRS Group s.r.o. Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic Declares that the product Name of product: DMX Shutter Type: DMX SHUTTER-3, DMX SHUTTER-5 Corresponds to the following product specifications: Safety: EN60065, resp. EN 60950 EMC: EN55103-1, resp. EN55103-2...
Need help?
Do you have a question about the DMX SHUTTER-3 and is the answer not in the manual?
Questions and answers