Advertisement
Quick Links
Advertisement
Summary of Contents for Jiuzhou Claro
-
Page 2: Table Of Contents
Our set-top box ensures you access to the TV service with satellite signal Claro TV digital and allows you to enjoy better sharpness in image and sound. In addition, the service brings you benefits as a fast program switching feature, automatic frequency search, lock password, all on one interface user friendly and easy to use. -
Page 3: Safety Instructions
Safety Instructions Do not allow the receiver to be exposed to extreme heat, cold or moisture. Do not remove the cover to prevent electric shock or damage. Do not place heavy objects on the receiver. If the receiver is not in use for a long time, disconnect the power cord to prevent fire or electric shock (do not use a damaged power cord). -
Page 4: Tv Receiver
2. TV Receiver 1) Front Panel 1.Power button Switch between power mode and standby mode. 2.CH- / CH+ button Changes the current channel to the previous or next channel in the menuless state. 2) Rear Panel 1. RF IN Digital signal input door coming in from the antenna. 2. - Page 5 6. AUDIO Right and Left These connectors give you the ability to connect the audio signal to the external amplifier or AUDIO input from the TV. 7. S/PDIF Uses electrical output to connect the receiver to the audio amplifier input. opposition 8.
-
Page 6: Remote Control Unit
3) Remote Control Unit All decoder features can be controlled with the remote control. : Turns on or off. : Turns off the sound. AUDIO: Displays the audio selection window. INFO: Displays the current channel information. TV/R: Switches between TV and Radio modes. MENU: Displays the main menu. - Page 7 3. Connector 1. Connect the LNB satellite signal to the LNB IN connector.. 2. Connect the TV using an AV cable. 3. Connect the TV using a HDMI cable.
-
Page 8: Introducing Features
4. Introducing features 1) Main menu The main menu consists of five parts: System Settings: This part allows the user to run satellite settings, automatic scanning of a given satellite, manual scan of a specified TP, OTA update and reset all factory settings. Channels: This part allows the user to check the menu of the Programming Guide and channel information, editing and sorting of the program, and editing of Favorite Channels List. - Page 9 The user can press the yellow key to add a recording time and press the red to cancel it...
- Page 10 The user can select recording parameters from this list, such as the following: Time Scheduler Cycle, Start Date, Start Time, Channel Time duration Record from the Guide When the focus is on the right side, the user can set a new recording timer or cancel it for the current event by pressing the yellow button Record directly The user can start a recording just by pressing the REC button when the set-top box is connected to any storage device, for example, usb...
- Page 11 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.