Page 2
Congratulations on your new Model L6 electric scooter ! We are happy you chose to Ride new L6 Electric Scooter. We hope you find it to be a Great riding experience, Adding efficiency and fun to Your daily commuting.
This manual was written to help you understand the proper use and maintenance of model L6 electric scooter. It is important for you to understand your new MODEL L6 electric scooter; its features and performance, so that you will enjoy the most from your first and every ride.
Page 4
LANGFEITE L6 MAIN PARTS Rear light Signal light Rear suspension 140 brake disc tire Brake lever Throttle Display Front light button Brake lever Signal light button Grip Grip Horn...
Page 5
MODEL L6 LIGHT BUTTON LCD DISPALY BRAKE LEVER THROTTLE BRAKE LEVER QUICK FOLDING MECHANISM HORN QUICK FOLDING MECHANISM HANDLEBAR ALUMINIUM DECK ANTI SKID GRIPS HEADLIGHTS MUDGUARD FRONT SUSPENSION REAR LIGHT DISC BRAKE MOTOR TIRE Disc brake CHARGING PORT SUSPENSION LITHIUM ION BATTERY...
Specification 1160*570*1210 mm Overall size (MM) Size Size after folding (MM) 1140*220*470 mm Carton size (MM) 1220*260*480 mm 150kg Max. Loading (KG) Weight Net weight (KG) 23kg Application People Age Adult Top speed (KM/H) 38km/h 10.4Ah 30 Km, 20.8Ah 60km Range (KM) Speed ( With 75kg load, on a flat road )
Page 7
LANGFEITE L6 Display Manual MODE button Battery status ON/OFF button Pressing to power the scooter on Press for three seconds to shut down the system. AUTO OFF After five minutes of non-using any function, the scooter will be automatically power off.
Parameter settings Pressing together for 2 seconds , will enter the instrument parameter setting interface. First of all, we can see P00 by turns, we can find P01, P02, P03, P04, P05, P06, P07, P08, P09 and then press P00: Wheel diameter setting This P00 setting has been programed by the controller, and the P00 setting on the display is not workable.
Page 9
P03: Speed signal selection setting This P03 setting has been programed by the controller, and the P03 setting on the display is not workable. so please ignore this P03 setting. P04: KPH / MPH selection setting At P04, pressing for 3 seconds, we can see the number is flashing.
Page 10
P08: Speed limit adjustment in percentage This P08 setting can adjust the scooter's real top speed. 100% At P08, pressing for 3 seconds, we can see the number is flashing. 100% When the number is in , means the scooter can reach the 100% top speed, and if we want to reduce the top speed, we can press to reduce the percentage number.
RECORD SERIAL NUMBERS: Write down the serial number of your model L6. Keep this information separately and in a safe place. Each model L6 has a unique serial number. These numbers can provide information that may be useful later on for insurance claims and in case of loss or theft.
SAFETY DRIVING ATTENTION Get to know your L6 before driving it Test your control over it. Make your turns slowly and cautiously, and give yourself stopping distance To gain control over your scooter, practice your first ride on your L6 in...
Do not operate the scooter while charging! Charge the battery only using Kerry Motors approved charger The use, storage or charging of the model L6 battery outside specified limits may result in the annulment of the warranty, battery damage, and an ineffective battery charge DO NOT CUT, OPEN, CRUSH OR PUNCTURE BATTERIES! IN THE EVENT OF A BATTERY LEAK, PREVENT CONTACT OF LIQUID WITH SKIN OR EYES.
Page 15
70-90°, like on skate/ surfboard). It will help you gain more stability Turns - The turns on L6 are done as on skis/surf/snowboard. The handle-bar should be in parallel to the body. Before turning look at the approaching...
Need help?
Do you have a question about the L6 and is the answer not in the manual?
Questions and answers