Table of Contents
Advertisement
Copyright
Copyright © 2003 by BENQ Corporation. All rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of
this company.
Disclaimer
BENQ Corporation makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Further, BENQ Corporation reserves the right to
revise this publication and to make changes from time to time in the
contents hereof without obligation of this company to notify any person
of such revision or changes.
*Windows is the trademark of Microsoft Corporation. Others are
copyrights of their respective companies or organizations.
1
Advertisement
Table of Contents
Related Manuals for BenQ Joybee 120
Summary of Contents for BenQ Joybee 120
- Page 1 Copyright Copyright © 2003 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
-
Page 2: Features At A Glance
Welcome Thank you for choosing BenQ Joybee 120 MP3 Player. This player is a plug'n'play device that enhances your digital life experiences. It can also serve as your personal MP3 player and USB Flash Drive. This manual explains how to use the features of the player and listen to high quality MP3 music. -
Page 3: Handling Instructions
Important BENQ Corporation assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all your important data on other media to protect against its loss. -
Page 4: Table Of Contents
1.6 Specifications ......... 9 2. Your Joybee 120 MP3 Player....10 2.1 Buttons/Ports . - Page 5 5. BenQ Joybee 120 MP3 Player Installation Software....... 28 5.1 Install the driver software in PC ......29 5.2 Remove the driver software in PC .
-
Page 6: Introduction
1. Introduction 1.1 Description The BenQ Joybee 120 MP3 player is multi-functional with high sound quality and low power consumption (battery life up to 16 hours). It supports MP3 and WMA music formats and uses ADPCM format for voice recording. It also features FM radio (for both listening and recording), EL backlight display, language learning, firmware upgradable and doubles as a USB Flash Drive. -
Page 7: Using The Carry Bag
1.3 Using the carry bag You can put the Joybee 120 MP3 player and its accessories in the carry bag as follows for easy access. 1.4 System requirements Microsoft Windows 98/2000/ME/XP Pentium 200MHz or higher USB port CD-ROM drive 40MB hard disk space or more... -
Page 8: Connecting To Pc
1.5 Connecting to PC Use the supplied USB cable to connect your MP3 player to your PC. Plug the square end of the cable to the MP3 player and the rectangular end to the USB port of your PC. Note: Check the battery before connecting your MP3 player to the PC. The MP3 may not connect properly when the battery is low. -
Page 9: Specifications
Formats supported: Power source: Power consumption Maximum output: FM frequency range: Dimensions: Joybee 120 Built-in 64/128/256MB flash memory (optional) Read: 900kbps Write: 650kbps ADPCM (recording can be played back in PC with any player supporting WAV format) 250 minutes (64MB) -
Page 10: Your Joybee 120 Mp3 Player
2. Your Joybee 120 MP3 Player 2.1 Buttons/Ports For voice recording. Power Switch Note: This power switch should remain in the ON position under normal condition. In case the unit does not function normally, push the button to the off position to turn off the unit. -
Page 11: Neck Strap Hole
When playing, press this button to pause or resume playing when it is paused. Hold down this button for 2 seconds to stop playing or recording. will appear momentarily and then will enter the (Fig.2) Neck strap hole Your Joybee 120 MP3 Player Power Earphone Jack... - Page 12 Move up the cursor in the menu. While listening in FM mode, press this button to go to previous radio frequency. Your Joybee 120 MP3 Player Neck strap hole Next track/Fast forward( ) Press to skip to the next track while playing in MP3/WMA, Music- Lyrics, Voice mode.
-
Page 13: Lcd Display
(5) Total songs (6)+(7) 1-Track repeat (6)+(8) All repeat (9) A-B repeat (10) Page down (11) Page up (12) Song Title (13) MP3/WMA mode (14) Recording (15) Currrent track elapsed time (16) Current track total time Your Joybee 120 MP3 Player... -
Page 14: Power Source
LED indicator light on the charger will light up orange. When the battery capacity is near full (which takes about 3 hours of charging time), the LED indicator turns into red. It takes about 4 hours to fully charge the battery. Your Joybee 120 MP3 Player... -
Page 15: How To Use Your Joybee 120 Mp3 Player
2 seconds to turn off the player. Note: 1) Press and hold 2) In standby mode, press RECORD, REPEAT, SETTING. 3) Press for 2 seconds to return to standby mode. to enter. How To Use Your Joybee 120 MP3 Player OYBEE to choose MODE,... -
Page 16: Change Mode
(Fig.6). Press this key again to continue playback. (Fig.5) Stop While playing, hold down the button and enter the standby mode. How To Use Your Joybee 120 MP3 Player to choose MP3/ to choose MP3/ to confirm (Fig.4) (Fig.4) to fast rewind or fast forward (Fig.6) - Page 17 EQ mode and press to confirm and return to the previous screen. Press MENU again to return to the current track screen (Fig.5). You can also set the EQ mode in SETTING. (Fig.8) (Fig.9) How To Use Your Joybee 120 MP3 Player...
- Page 18 HOLD to lock the button, shown in (Fig.12), press to confirm (Fig.13). While the buttons are locked, press A-B button for 2 seconds to release them from locking. UNLOCK is displayed. (Fig.12) (Fig.13) How To Use Your Joybee 120 MP3 Player...
- Page 19 (Fig.17). (Fig.16) (Fig.17) Select a recording file The operation is the same as SELECT A TRACK in MP3/WMA mode. Play/Pause Same as in MP3/WMA mode. Display will be similar to (Fig.18). (Fig.18) How To Use Your Joybee 120 MP3 Player...
- Page 20 Same as in MP3/WMA mode. Hold Same as in MP3/WMA mode. Repeat Same as in MP3/WMA mode. A-B repeat Same as in MP3/WMA mode. Delete voice recording file See DELETE in SETTING on page 25. How To Use Your Joybee 120 MP3 Player...
- Page 21 When a channel is found, the player will play the boardcasting. If the reception is not satisfactory, press for fine tuning. To continue to search for other channels, just press button. (Fig.20) How To Use Your Joybee 120 MP3 Player to listen. The to stop...
- Page 22 While listening to a radio program, press MENU to display the sub menu (Fig.23). Press to select MODE (Fig.25) and press to choose MP3/WMA, VOICE, FM enter (Fig.26). Press RADIO mode and press to enter the desired mode. (Fig.25) (Fig.26) How To Use Your Joybee 120 MP3 Player...
-
Page 23: Record Mode
When normal playback is selected, the mode will not be displayed. Press to confirm and return to the previous screen (Fig.1). (Fig.28) to stop recording and return to voice mode. (Fig.29) How To Use Your Joybee 120 MP3 Player to start recording. The to enter (Fig.29) and then... -
Page 24: Player Setting
In the setting sub menu, press to select NORMAL, BASS, to enter (Fig.34). Press TREBLE, ROCK, JAZZ, CLASSIC, POP EQ mode. Press confirm and return to the previous screen and press MENU again to exit. (Fig.34) (Fig.33) How To Use Your Joybee 120 MP3 Player... - Page 25 BATTERY (Fig.38) and press to display the battery status (Fig.39). Press any button to return to the previous screen. Press MENU again to exit. (Fig.38) (Fig.39) full battery weak battery low battery How To Use Your Joybee 120 MP3 Player...
-
Page 26: Backlight
The player will turn off the backlight automatically if there is no operation in 8 seconds. You may also turn off the backlight by holding down How To Use Your Joybee 120 MP3 Player to select MEMORY (Fig.40) and (Fig.41) to select CONTRAST (Fig.42). -
Page 27: Benq Mp3 Player As Usb Flash Drive
4. BenQ MP3 Player as USB Flash Drive The BenQ Joybee 120 MP3 Player can be used as a USB Flash Drive. You can download/upload any files between your PC and your player. However, files not in MP3/WMA/WAV format will not be displayed in the player. -
Page 28: Benq Joybee 120 Mp3 Player Installation Software
BenQ Joybee 120 MP3 Player software is both the driver and interface for downloading or uploading MP3/WMA files, voice recording files, and data files between your PC and MP3 player. -
Page 29: Install The Driver Software In Pc
1. Insert the installation CD into your CD ROM drive, the welcome screen (Fig.44) appears. 2. Click Install MP3 Player Host Driver. Follow the instructions to proceed. Click EXIT if you do not want to install drivers. BenQ Joybee 120 MP3 Player Installation Software (Fig.44) -
Page 30: Remove The Driver Software In Pc
5.2 Remove the driver software in PC In Control Panel, open Add/Remove Program (Fig.45). In the Add/ Remove tab, select BenQ Joybee 120 MP3 Player. Click Add/Remove and follow the on screen instruction to remove the software. (Fig.45) BenQ Joybee 120 MP3 Player Installation Software... -
Page 31: How To Use The Driver Software
Remove your MP3 player from the USB after this. Drive F will disappear from "My Computer". Note: Remove your MP3 player from the USB cable only when the message READY! appears on the screen. BenQ Joybee 120 MP3 Player Installation Software... -
Page 32: How To Format Your Mp3 Player
5.4 How to format your MP3 player Select \BenQ Joybee 120 MP3 Player\MP3 Format in the Start\Program files\menu. Click Start to start formatting your MP3 player in the MP3 Format window (Fig. 46). Click Close when finished. (Fig.46) BenQ Joybee 120 MP3 Player Installation Software... -
Page 33: Using Usb To Connect Your Mp3 Player To Pc
The message READY! will appear on the screen of the MP3 player. A Found new hardware message box will appear and start looking for the driver for the hardware, Select BenQ Joybee 120 MP3 Player driver and follow the instruction to finish installation. After the driver is installed, a new removable drive will appear in My Computer. -
Page 34: Remove From Pc In Windows Xp
Using USB To Connect Your MP3 Player to PC A dialogue box will pop up. Please first tick the "Display device components" box. Next the dialogue box would list the current external devices in detail. Select BenQ Joybee 120 MP3 Player and click Stop. -
Page 35: Firmware Recovery
3. Connect the MP3 player to PC with the USB cable. 4. Push the power switch to ON position. 5. In the computer, run Start\Program Files\BenQ Joybee 120 MP3 Player\Joybee Firmware Update while holding down the MENU button on the player for 10 seconds.. - Page 36 After the above window disappeared, a removable drive will appear in the computer. Run Start\Program Files\BenQ Joybee 120 MP3 Player\Joybee Format Utility, MP3 Format (Fig.46) will appear, uncheck the box Quick Format, and click Start to format. Click Close after it is done.
- Page 37 Windows as Fig.48 appears automatically, uncheck the box Quick Format, and click Start to update, Click Close after it is done. Run Start\Program Files\BenQ Joybee 120 MP3 Player\Joybee Format Utility and Fig.49 appears, and click Start to format. Click Close after it is done.
- Page 38 3) In some cases, the Joybee Format Utility window (Fig.47) may not appear or Joybee Firmware Update window (Fig.48) may not automatically appear in above operations. It is because the new firmware is not installed properly. Please check the firmware list in the Device Manager and reinstall the equipment (USB Driver) with an exclamation mark from CDROM:\\Plager\Windows\Drivers.
-
Page 39: Qmusic
After QMusic is installed, click Finish to complete the installation process. Now you can start to use QMusic! XP operating system , BenQ ’s powerful media ® If you do not want to install the program in the default folder, please click “Browse...”... -
Page 40: Add Songs To Joybee
8.2 Add Songs to Joybee To add songs to Joybee, first you have to plug the device into your computer's USB port. You will then see the device show up on QMusic. Now you can add songs to Joybee. Please follow the steps below: Select My Joybee. - Page 41 Now you can see songs in Joybee. Select the songs you want to add to Joybee and drag them onto a play list here. To arrange the order of the song(s), simply click on the song(s) you want to re-arrange, and drag it/them to the desired position on the list.
- Page 42 There is also another way to add songs to Joybee: Select Music Library first. Click Add List. Next you will be asked to key in a list name. Type whatever name you want. QMusic...
- Page 43 After a list is created, you can add songs you want to put in Joybee on this list. Select the list and press Add Song to do A dialogue box will pop up. Choose as many songs (MP3 format only) as you want to add to the list.
- Page 44 Now you can see songs on the list. QMusic To arrange the songs on the list, click on the song(s) you want, and drag it/them to the desired position on the list. To delete songs, select the ones you want to delete and press Delete key on the keyboard.
- Page 45 After the list is ready, you can select all songs on the list, and drag them to Joybee. Click on Joybee and you will see the songs. QMusic...
- Page 46 There is still a third way to add songs to Joybee: Click this icon Click the Joybee tab. Select the circled item if you want the songs into your Joybee updated automatically everytime you plug the device to your computer. Then from the pull-down menu select the source list for Joybee update.
- Page 47 Now if you want to have Joybee updated, first make sure you have put all songs you want in the source list (see page 42), then disconnect the Joybee, and plug it back. The songs in Joybee will get updated automatically. If you would like to update Joybee manually, please choose the circled option shown above.
- Page 48 Now you should return to the main screen. Click on update action, and Joybee will get updated. When you use the means of update to add songs to Joybee, the songs in Joybee will get deleted first, and then the computer will export the songs on the source list to Joybee.
-
Page 49: Troubleshooting
Unstable power supply during communication may cause loss of data (we strongly recommend that user back up all important data, BenQ Corporation assumes no responsibility for any damage or claims caused by loss of data). The player allocates memory in cluster of 16KB or 32KB. - Page 50 Why my MP3 player does not display anything? Troubleshooting Check if the battery is empty. Check if the power switch is in ON position. There may be system data loss due to improper operation. Proceed with firmware recovery.
-
Page 51: Frequently Asked Questions
Because the parameter of the volume level during recording of each song may not be the same, the volume level of different songs are different. How can I get helped using the Joybee MP3 player and obtain driver/firmware updates? Please visit http://www.BenQ.com Frequently Asked Questions... - Page 52 Frequently Asked Questions...
Need help?
Do you have a question about the Joybee 120 and is the answer not in the manual?
Questions and answers