Tools Needed For Installation; Materials Supplied - Thermador T24UC925DS Installation Manual

Tools needed for installation

Tape Measure Philips Screwdriver Level
Flat-blade screwdriver Adjustable wrenches ¹ ₄" Nut driver ¼" Drill bit & drill
These are the tools that you may need for the installation of the appliance. However, if you need to
modify the counter or cabinetry to fit the unit, you may need other tools to make counter/cabinetry
modifications before installing the appliance.

Materials supplied

Anti-tip-bracket. 2 pieces.
KIT ALSO INCLUDES
ONLY FOR
Screws: 2 pieces.
T24UC905DP MODELS:
1 Insulating Foam (Not
Wood Screws:8 pieces
illustrated) 20 1/2"
Overlay support: 8 pieces
(520mm) x 29 1/8"
(740mm) x 1/8" (3mm)
Page | 4