Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully
for any damage that may have
occurred during transit. Check for
loose, missing, or damaged parts. If
any damage is observed, a shipping
damage claim must be filed with
carrier. Do not use Strut Compressor
if broken, bent, cracked or damaged
parts (including labels) are noted.
Any Strut Compressor that appears
damaged in any way, operates
abnormally or is missing parts
should be removed from service
immediately. If you suspect that the
Strut Compressor was subjected
to a shock load (a load that was
dropped suddenly, unexpectedly,
etc.) immediately discontinue use
until it has been checked by a factory
authorized service center.
WARNING
The following safety information is provided as guidelines to help you operate your Air Operated Strut Compressor
under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety
or safe handling instructions are not known or not followed. The following safety instructions are to provide the user
with the information necessary for safe use and operation. Please read and retain these instructions for the continued
safe use of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make
certain that anyone that uses the equipment understands and follows these safety instructions as well.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Notes
: Provide clarity and helpful information.
09/14
2014 ©OEM-TOOLS
AIR OPERATED
STRUT COMPRESSOR
24860
Advertisement
Table of Contents
Summary of Contents for OEM Tools 24860
- Page 1 Operating Instructions and Parts Manual 24860 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
- Page 2 Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR Thank you very much for choosing an OEMTOOLS at all times when operating this tool. Product! 8. Check for damage. Check your tool regularly. If part of the tool is damaged it should be carefully For future reference, please complete the owner’s...
- Page 3 Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR fluid, oil, and grease. components if said damage is the result of unskillful handling by the operator or of failure • Before use, read and understand all warnings, to observe the basic safety rules set forth in the safety precautions, and instructions as outlined instruction manual.
-
Page 4: Specifications
Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR • Compress the spring only until it is loose in its mounts. • Always evaluate your task before using this Strut Compressor. Use as intended only. • Stop compressing if the spring or the arms bottom out. -
Page 5: Operation
Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR 8. Install the locating platform by threading it onto a quarter turn. Do not loosen if loosening may release the long metal rod and securing it by attaching the the nut from shaft. -
Page 6: Maintenance
Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR 6. Use the chain to secure the spring by pulling it WARNING across the spring and hooking it onto the clip. Shut Keep Hands away from the spring while compressing the safety guard ensuring that it locks in place. -
Page 7: Parts List
Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR PARTS LIST FIGURE DESCRIPTION FIGURE DESCRIPTION FIGURE DESCRIPTION 24860-K1 Handle 24860-K24 Lower Strut Support 24860-K47 Moving Arm Cover 24860-K2 End Plug 24860-K25 Base(1) 24860-K48 Bolt 24860-K3 Washer 24860-K26 Bolt 24860-K49... - Page 8 Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR PARTS LIST Description Handle End plug Bolt Washer Lock washer Washer Frame ass'y Upper strut support Control ass'y Bolt Chain Shackle Hook K18 K19 Copper bushing Bolt Hook ass'y Bolt...
- Page 9 Operating Instructions and Parts Manual 24860 AIR OPERATED STRUT COMPRESSOR OEMTOOLS™ LIMITED 90 DAY WARRANTY Please read the following carefully From 90 days from the original purchase of this product, OEMTOOLS will warranty this item. If you find any defect in material or workmanship, through normal usage, return it to the place of purchase or to OEMTOOLS for repair or replacement at our discretion.