Ipod Operation - Jensen Marine MSR3012 Installation And Operation Manual

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
• iPod Nano (1G, 2G, 3G, 4G and 5G)
• iPod 5G
• iPod Classic
• iPhone, iPhone 3G, iPhone 3GS, iPhone 4
• iPod Touch
• iPod Touch 2G
NOTE: Earlier model iPods are not supported because they do not implement the USB
control protocol. Also, the iPod Shuffle is not supported because it does not utilize the
30-pin Apple iPod Connector. These unsupported iPod models may be connected to the
radio using one of the Auxiliary Inputs.
Accessing iPod Mode
1
4 24
2a
13
2b
18 14 17 8
Connect a supported iPod or iPhone to the front panel USB connector. The iPod icon
illuminates in the bottom right corner of the LCD whenever an iPod or iPhone is attached to the
USB connector. Music playback begins automatically.
To enter iPod mode from any other source, press the MODE/SEL button (4) until "USB"
appears on the display. If the user connects an iPod containing no songs, the radio will
display a message stating "No Songs" when it enters iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is connected to the front panel USB
connector, as long as the vehicle ignition is turned on. You can turn the iPod off by
disconnecting it or by turning the ignition off. When the ignition is turned off, the iPod will pause
and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be
turned on or off from the iPod itself.
20 21 22
23
6 5 7 9 10 12 25 11
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.
Controlling Playback
Selecting Tracks
During playback, press the SEEK/TUNE/TRK |<< / >>| button (20/21) to play the previous or
next track in the current category. Press the SEEK/TUNE/TRK |<< button (20) once to play the
song from the start position or press SEEK/TUNE/TRK |<< twice to play the previous track.
Press and hold the SEEK/TUNE/TRK |<< / >>| button (20/21) to fast reverse/forward the song.
Pausing Playback
During playback, press the 1/>|| button (8) to pause the iPod player. "PAUSE" will appear on
the LCD. Press 1/>|| again to resume playback.
Repeat Play
During playback, press the 3/RPT button (5) to repeat the current song. "REPEA" will appear
on the LCD. Press 3/RPT again to stop repeat playback.
Random Play
During playback, press the 4/RDM button (7) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. "SHUFF" will
appear on the LCD. Press 4/RDM again to stop random playback.
3
NOTE: If you press and hold the SEEK/TUNE/TRK |<< / >>| button to change the current
16
song to the previous/next song, you will exit fast reverse/forward mode.
15
19 Alternate Display Information
Press the SCROLL/INFO button (12) to change the display information in the following order:
ARTIST NAME > SONG TITLE > FOLDER NAME.
Search Mode
Press the BAND/SEARCH button (16) repeatedly to enter iPod search mode and choose from
the following search criteria: Playlist, Artist, Album, Song, Genre or Composer (consecutively).
When search mode is selected, press the MODE/SEL button (4) to confirm selection. Use the
VOLUME +/- buttons (2) to navigate through various list selections. Press MODE/SEL (4) to
make your final selection.
14
MSR3012