1. Manuals
  2. Brands
  3. Taiden Manuals
  4. IP Camera
  5. HCS-3316HDN
  6. Installation and operating manual

Taiden HCS-3316HDN Installation And Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HCS-3316HDN Videoconference Camera

Installation and Operating Manual
V 1.1

Advertisement

Table of Contents
loading

Summary of Contents for Taiden HCS-3316HDN

  • Page 1 HCS-3316HDN Videoconference Camera  Installation and Operating Manual V 1.1...
  • Page 2 Safeguard Before installing the camera, please read this manual carefully, please follow this manual during installation and operation, and keep this manual for future reference. Power adapter of camera can transfer external AC 110 – 240 V to DC 12 V with 2.5 A in maximum, please follow local electric safety regulation strictly during installation and operation.
  • Page 3 Video and control cables should be well-shielded to keep stable signal transporting. Please set the cables (power/video/control) to safe place to avoid trampling, do not pile up sundries over cables. Cables shall be protected well especially the connection part.

  • Page 4: Table Of Contents

    Contents Overview -------------------------------------------------------------------------- 1 1.1 Introduction ..................1 1.2 Features ....................2 1.3 Specifications ..................3 1.4 Product and Accessories ..............5 Connection ------------------------------------------------------------------------ 7 Panels and Interfaces ---------------------------------------------------------- 8 3.1 Front panel ..................8 3.2 Back panel ..................8 3.3 Interfaces ....................

  • Page 5: Overview

    1. Overview 1.1 Introduction The product is an industry's leading high-definition conference room camera; it uses a powerful 1/2.8 inch HD image processor with 5 million pixels, built-in high-performance optical zoom lens, powerful high-definition image engine, image imaging algorithm with wide dynamic range and high S/N ratio, combined with the unique noise reduction algorithm, provides 1080P60 full HD broadcast level image experience for users.

  • Page 6: Features

    1.2 Features 1. Equipped with 1/2.8-inch HD CMOS sensor, with powerful image engine and imaging algorithm, provides full HD broadcast image experience up to 1080P60. 2. Equipped with high-performance electric zoom lens with a zoom effect of up to 240 times (20 times optical 12 times digital). 3.

  • Page 7: Specifications

    Backlight Compensation On / Off Pan/Tilt Speed Pan: 0.1°～200°/sec, Tilt: 0.1°～150°/sec Pan/Tilt range Pan: ±170°, Tilt: -30°～90° 128 (TAIDEN conference management software can Preset preset, clear and recall 64 preset positions) Preset precision 0.1° Multiple video output 1-way 3G HD-SDI, 1-way HDMI and 1-way IP video...
  • Page 8 Items Specifications Baud Rate 2400/4800/9600/19200/38400 bps Video coding standard H.265，H.264 Main stream resolution 1920x1080，1280x720 Sub stream resolution 720x576，720x480，960x540 Bitrate Variable (128k-8192kbps) / fixed Frame rate 50Hz: 1-50fps, 60Hz: 1-60fps OSD Menu Chinese / English Address 1～254 Operating temperature: 0℃～+50℃ Temperature Storage temperature: -20℃～+70℃...

  • Page 9: Product And Accessories

    1.4 Product and Accessories Camera Remote controller Power adaptor RS-232 cable RS-485 converter plug Ceiling installation template (2pcs)
  • Page 10 Wall fixing bracket User manual Warranty card Certificate...

  • Page 11: Connection

    2. Connection...

  • Page 12: Panels And Interfaces

    3. Panels and Interfaces 3.1 Front panel ❶ Lens ❷ Sensor for remote controller ❸ Power indicator ❹ COM indicator 3.2 Back panel ❶ RS-485 interface ❷ RS-232 OUT interface ❸ RS-232 IN interface ❹ RJ-45 interface ❺ USB2.0 interface ❻...

  • Page 13: Interfaces

    3.3 Interfaces 1. HD-SDI interface: BNC connector, carrying HD video, maximum transmission distance is usually 100 meters using standard 75 ohm coaxial cable. 2. HDMI interface: standard HDMI connector, carrying HD video, maximum transmission distance is usually 15 meters. 3. CVBS interface: reserve. 4.

  • Page 14: Rs-232 Interface Pin Definition

    3.4 RS-232 interface pin definition RS-232Cable DB9 pin definition 3.5 RS-485 interface pin definition Pin definition DATA+ DATA-...

  • Page 15: Rs-232 Cable Connection

    3.6 RS-232 cable connection...

  • Page 16: Com Connection Methods

    3.7 COM connection methods Open OSD menu, enter <system> sub menu, configure COM setting such as protocol, baud rate and control port in related menu items. Note: reboot of power off takes effect after configuration. Note: In RS-232 daisy chain connection, cameras shall be connected one by one with increased address started from 1, maximum is 7, please configure correct camera address before installation.

  • Page 17: Ir Remote Controller And Dip Switch

    4. IR Remote Controller and DIP Switch 4.1 IR Remote Controller – Key Layout...
  • Page 18 1. [POWER]: power on/off 2. [CAMERA SELECT]: select the camera address for controlling 3. [0-9]: number key 4. [SET]: set preset 5. [CLEAR]: clear preset 6. [CALL]: call preset 7. [FOCUS +]: focus to far direction 8. [FOCUS -]: focus to near direction 9.

  • Page 19: Ir Remote Controller - Operation

    4.2 IR Remote Controller – Operation Power-on initialization When camera is powered on, power indicator is on, camera head will rotate in horizontal and vertical direction automatically, and camera lens will be zoomed to tele and wide direction simultaneously. After pan/tilt/zoom self-checking completed, COM indicator will flash and keep lighting finally, camera will be positioned to HOME position, COM indicator keep lighting before the first command arrives from IR remote...
  • Page 20 Change camera speed The camera’s pan/tilt speed can be switched between fast and slow mode, when fast mode is on, press [DOME SPEED] button to switch to slow mode, and vice versa. The camera’s zoom/focus speed can be switched between fast and slow mode, when fast mode is on, press [SPEED] button to switch to slow mode, and vice versa.
  • Page 21 Special Preset Some special presets are defined inside camera; calling of these presets will achieves some camera operation such as video format switching, and etc. User shall not save positions to these special presets. Definition of special presets As shown below: Preset for COM Description command...

  • Page 22: Ir Remote Controller - Menu Operation

    4.3 IR Remote Controller – Menu Operation OSD menu can be displayed and operated using IR remote controller, as shown below. If menu is displayed, camera will not respond to operations other than menu navigation from IR remote controller or COM port, OSD menu will not be displayed in SD video output.
  • Page 23 Main Menu Sub Menu Option Description 1080P60 1080P50 1080P30 1080P25 VIDEO FORMAT Set video format 1080I60 1080I50 720P60 720P50 1-15: NR level NOISE FILTER 0-15 0: Off PICTURE FLIP Picture flip on/off Real Custom VIDEO Default Standard Soft VIDEO STYLE Bright Set video style Colorful...
  • Page 24 Main Menu Sub Menu Option Description BRIGHTNESS Set brightness (0-99) GAMMA Set GAMMA (0-31) CONTRAST Set contrast (0-100) SATURATION Set saturation (72-172) ADVANCED VIDEO OVERALL Set overall sharpness (0-15) SETTING SHARPNESS DETAIL SHARPNESS Set detail sharpness (0-15) VIDEO Set video enhancement ENHANCEMENT (Auto/0-16) AUTO...
  • Page 25 Main Menu Sub Menu Option Description CONTROL 2400/4800/9600/ Set control baud rate BAUDRATE 19200/38400 VISCA CONTROL Set control protocol PROTOCAL PELCO-D Set control address, CONTROL (1-7) or (1-254) (1-7) for VISCA SYSTEM ADDRESS (1-254) for PELCO-D ENGLISH MENU LANGUAGE Set menu language CHINESE DHCP IP ADDRESS...
  • Page 26 Main Menu Sub Menu Option Description AUTO STARLIGHT Set starlight mode MODE STARLIGHT EXPOSURE SUPER STARLIGHT GAIN MAX LIMIT 0 dB-160 dB Set gain max limit AUTO BACKLIGHT Open/Close backlight mode AUTO INDOOR MODE OUTDOOR Set white balance mode MANUAL WHITE WB PARAMETER 250-750...

  • Page 27: Dip Switch

    4.4 DIP Switch 1. DIP switch In camera’s back panel, there are one DIP switch marked, this switch has 4 sets which can be configured to ON or OFF, as shown below. 2. Switch configuration Set switch to configure camera video format Setting Video format Can Change Video...

  • Page 28: Network Operation

    5. Network Operation 5.1 Installation and Environment 1. Running environment Operating system: Windows 7/8/10 Network Protocol: TCP/IP Client PC: P4/128M RAM/40G HD/Scalable graphics card, DirectX 2. Installation Connecting the network camera to the network or directly to a PC with crossover twisted-pair cable; Connect DC 12V power;...

  • Page 29: Access Camera

    5.2 Access camera 1. Get camera IP address Default camera address 192.168.1.88, with mask 255.255.255.0. Watch the video output of the camera, open the camera menu by remote control or other means, and you can see the IP address of the current camera in the sub-menu "About", as shown in the figure:...
  • Page 30 2. Access IP Camera Under the condition of the connection between client PC and IP camera: Enter 'http://192.168.1.88' in the web browser to access the IP camera login interface. As shown in the figure, the default user name and password are "Admin" and "888888". Enter the username and password and click "Log in"...
  • Page 31 Doom, zoom, focus, menu and preset position can be realized. If you need to adjust the video effect parameters, please go to the camera menu. If you need to adjust the user management, IP address and coding parameters of the IP camera, you can click the "Display/Hide Configuration Interface"...
  • Page 32 3. Camera control...
  • Page 33 4. User management 5. User name and password are composed of letters (case-sensitive) and digitals. Press the "OK" button to validate and press the "Cancel" button to restore the relevant parameters of the current camera. IP address and RTSP monitoring port (default is 554) can be modified, the system will automatically check the validity of the IP address.
  • Page 34 sense of flicker. Bit rate Users can specify the bit rate. Generally speaking, the higher the bit rate, the clearer the image. But the bit rate configuration needs to be combined with network bandwidth and decoding ability. When the network bandwidth is narrow or decoding ability is insufficient, and the allocated bit rate is to high, the video stream will not be able to transmit normally and the video effect will be poor.

  • Page 35: Vlc Streaming Media Player Monitor

    5.3 VLC Streaming Media Player Monitor Open the VLC player, click "Media" - "Open Network Stream", or press the combination key "Ctrl+N". Input URL address: rtsp://ip: port/1 (main stream); rtsp://ip: port/2 (auxiliary stream). RTSP port defaults to 554 and can be omitted. 5.4 Instructions for controlling cameras through TCP The camera currently supports a variety of methods to control the camera, including RS232, RS485, infrared remote control, HTTP web...
  • Page 36 Here are some commonly used commands: 1. Action command Action Format Description Stop zooming Stop 81 01 04 07 00 FF Tele (Standard) 81 01 04 07 02 FF Zoom at standard speed Wide (Standard) 81 01 04 07 03 FF Zoom Variable-speed zoom Tele (Variable)
  • Page 37 Zoom pqrs: zoom position 81 01 04 47 0p 0q 0r 0s 0t Direct focus tuvw: focus position 0u 0v 0w FF Automatic white balance Auto 81 01 04 35 00 FF Indoor white balance Indoor 81 01 04 35 01 FF Outdoor white balance Outdoor 81 01 04 35 02 FF...
  • Page 38 8x 01 06 01 VV WW 03 01 8x 01 06 01 VV WW 03 02 Down 8x 01 06 01 VV WW 01 03 Left 8x 01 06 01 VV WW 02 03 Right 1. VV: horizontal speed 0x01-0x18 8x 01 06 01 VV WW 01 01 Upleft (low-high)
  • Page 39 2. Query commands Command Response Description Query zoom pqrs: zoom position, range is: 0x0000-0x4000 81 09 04 47 FF 90 50 0p 0q 0r 0s FF position Digital p: digital zoom range, zoom p=0 (x1), 1(x1.5), 2(x2), 3(x4), 4(x8), 5(x10), 81 09 04 26 FF 90 50 0p FF query...

  • Page 40: Installation And Dimensions

    6. Installation and dimensions 6.1 Attention Before camera installation, please read safeguard in the beginning of this user manual carefully, and pay attention to the followings. Camera installation shall be done by qualified technician or personnel. Before installation, please check camera's DIP switch, make sure camera's address configured correctly.
  • Page 41 Ceiling installation: must choose strong ceiling or room roof to hold camera in this installation method. Refer to dimension and position of four holes in camera's ceiling holder, four holes shall be made in right place of ceiling or roof, then use three M5X40 screws to connect ceiling holder and ceiling or roof together firmly;...
  • Page 42 Check camera's DIP switch, make sure camera's address and other settings configured correctly. Take down six foot pads in from camera bottom. Fix another ceiling holder to camera bottom with six PM3X6 screws. Lock the two ceiling holders, and fix them with five PM3X8 screws.
  • Page 43 Connect camera cables including power, video and control.

  • Page 44: Product Dimension

    6.3 Product dimension...

  • Page 45: Troubleshooting

    7. Troubleshooting Unable to complete self-checking during camera starting-up, with abnormal pan/tilt sound Please check whether standard power adapter be used, (KTEC, input: 110-240 V, 50/60 Hz, 0.8 A; output: 12 V, 2.5 A), if not, please check whether power output is compatible with output of standard power adapter.
  • Page 46 Make sure video cable connected well, no poor contact happens. Make sure camera configured with correct video format supported by external device, if not sure, may try 1080p25 format which is usually supported by most devices, and then try other format. Try connecting camera to HDTV or displayer directly, so to bypass complicated connections and locate real cause.
  • Page 47 Preset set by IR remote controller is not consistent with preset set by COM command Preset set by IR remote controller use ID defined from 1 to 128, which is mapped to a camera internal definition from 0 to 127; this internal definition is used in COM command, for example, preset 1 set by IR remote controller can be called by COM command using preset ID 0.
  • Page 48 Rhox Áudio e Vídeo Profissional - SIBS Quadra 2 conjunto C Lote 12 Brasília - DF - 71736.203 - Tel (61) 3051-5800 https://loja.rhox.com.br TAIDEN INDUSTRIAL CO., LTD. 6/F, Block B, Future Plaza, 6060 Qiaoxiang Rd, Nanshan District, Shenzhen,China P.C.: 518053 Copyright by TAIDEN Website: http://www.taiden.com...

Table of Contents