Download Print this page
LoadSurfer HLD1000 Instruction Manual

LoadSurfer HLD1000 Instruction Manual

Scissor lift pallet truck

Advertisement

Quick Links

Instruction Manual
Scissor Lift Pallet Truck
HLD1000/1500
Note: Owner/Operator must read and understand this instruction
Manual before using the Scissor Lift Pallet Truck

Advertisement

loading

Summary of Contents for LoadSurfer HLD1000

  • Page 1 Instruction Manual Scissor Lift Pallet Truck HLD1000/1500 Note: Owner/Operator must read and understand this instruction Manual before using the Scissor Lift Pallet Truck...
  • Page 2: Neutral Position

    INSTRUCTION RAISE POSITION Depress the lever #102(103-I) and pump handle until pallet has reached the desired height.A clearance of-1” between floor and pallet is usually sufficient to move the load. Do not lift load with one fork extremity of forks. NEUTRAL POSITION The neutral position is found at about 45”between th raise and lower position.This neutral (drive) position disengages the lifting mechanism making the handle free from...
  • Page 3: Ordering Parts

    where the forks are longer than the pallet will damage the truck of the pallet truck is pushed through the pallet and the forks are under a second pallet behind the one being lifted.When lowering the load,make sure the area where the pallet is to places is clear. 8.Observe traffic regulations.Yield rigth of way to pedestrians,Stop at cross aisles.
  • Page 4 Pump parts details...
  • Page 5 Pump parts details Item Part No. DESCRIPTION Item Part No. DESCRIPTION 11010101 PIN 11010135 SCREW 11010102 SPRING CAP 11010136 SPRING WASHER 11010103 SPRING 11010137 O-RING 11010104 DUST SEAL 11010138 BIG CYLINDER 11010105 BACK-UP RING 11010139 SNAP-RING 11010106 O-RING 11010140 COPPER WASHER 11010107 PUMP CYLINDER 11010141 LIFTING PISTON...
  • Page 6 Handle parts details Item Part No. DESCRIPTION Item Part No. DESCRIPTION 11010201 SNAP-RING 11010212 HANDLE 11010202 ROLLER PIN 11010213 SPRING PIN 11010203 BUSHING 11010214 LEVER 11010204 ROLLER 11010215 SPRING PIN 11010205 HANDLE STAND 11010216 BELEASE ROD 11010206 SPRING PIN 11010217 CHAIN JOINT 11010207 HANDLE PIN 11010218 CHAIN 11010208 PIN...
  • Page 7 Frame parts details Item Part No. DESCRIPTION Item Part No. DESCRIPTION 11010301 WASHER 11010314 NUT 11010302 BEARING 11010315 SPRING WASHER 11010303 LOAD WHEEL 11010316 SPACER 11010304 NYLON ROLLER 11010317 CENTRIFUGAL AXLE 11010305 SNAP RING 11010318 WASHER 11010306 LOAD WHEEL SHAFT 11010319 SCISSOR PROJECT 11010307 SNAP RING 11010320 SCREW...

This manual is also suitable for:

Hld1500