Matco Tools MTPGHE13 Manual

INTENDED USE OF THE TOOL
The MTPGHE Spray Guns are designed to spray the following solvent and
waterborne light to medium viscosity materials: Enamels, lacquers,
polyurethane, urethane top coats, urethane basecoat, urethane clearcoat and
all primers. Materials which are acidic, abrasive and/or contain benzene must
not be used. In order to achieve the best results, surface and paint preparation
must be completed in accordance with paint manufacturer's instructions and
recommendations. The MTPGHE Guns are intended to be used only by
professionally trained individuals. Strict compliance of applicable local and
national regulations must be followed.
• Normal use of this product is likely to expose the user to dust and/ or
microscopic particles containing chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm.
Always wear appropriate safety equipment and clothing when using
this product. Study, understand and follow all instructions provided with
this product.
• Always wear ANSI approved goggles when using this product.
• Always use the correct accessories for the job that you are performing.
• Always work in a clear, safe, well-lit, organized and properly equipped
area.
• NEVER begin repairs without ensuring that vehicle is in secure
position and will not move during repair.
Product Information:
DURABLE & LIGHTWEIGHT
• Forged body provides longer tool life
• Anodized body for corrosion protection
• Slick finish for faster & easier cleaning
• Internal coated passages
• Stainless steel needle and fluid tip
• Lightweight: 325 grams (0.7 Lbs)
HIGH EFFICIENCY
• Unique pattern designed for great coverage, optimal overlapping
• Low overspray (bounce back)
• Great transfer efficiency
• Superior atomization
• Innovative High Efficiency (HE) advanced technology
QUICK THREAD TECHNOLOGY
• 1 Turn to lock/unlock the air cap
• 3 Turns to lock/unlock the fluid tip
• Wide threads for easy cleaning
• M16*P1.5 female thread fluid joint
• Compatible with most traditional and disposable cup systems
SMOOTH OPERATION
• Soft trigger pull to reduce fatigue
• Precise lubricated adjustment knobs for better control
• Innovative CNC machining to avoid the need for gaskets behind the fluid tip
Specifications:
Nozzle Size:
Cup Capacity:
Operation Pressure:
Weight:
Gun Dimensions W x H:
Avg. Air Consumption:
Air Inlet Thread NPT:
Required Compressor:
Max. Pattern at 6" to 8" Distance:
Air Hose I.D. Size:
MODEL:
1.3mm, 1.5mm, 1.7mm or 1.9mm
600ml
29psi
0.7lbs. (325g)
7" x 5-3/4" (175mm x 145mm)
10.5-12.5cfm
1/4"
3-5hp
11"-13" (280-330mm)
6-8mm
MTPGHE13
MTPGHE15
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user against defective
material or workmanship for a period of 1 year from the date of purchase.
The manufacturer reserves the right to determine whether the part or parts
failed because of defective material, workmanship or other causes. Failures
caused by accident, alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace product covered
under this warranty free of charge. Repairs or replacements of products
covered under this warranty are warranted for the remainder of the original
warranty period.
The manufacturer or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service
representatives voids this warranty. The rights under this warranty are limited
to the original user and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some
states do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
When unpacking, check the parts diagram and part number listing
on page 3 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor immediately.
Read these instructions carefully before installing, operating,
servicing or repairing this tool.Keep these instructions in a
safe accessible place.
HIGH EFFICIENCY/HIGH TRANSFER SPRAY GUN WITH PLASTIC CUP
Page 1
HIGH EFFICIENCY/HIGH TRANSFER SPRAY
GUN WITH PLASTIC CUP
WARNING
Unpacking
Important