Control Panel - Siemens S18ID Series Operating And Care Instructions

Control panel

To utilize all the functions of your appliance, we recommend that you familiarize yourself thoroughly with the control
panel and the setting options.
A power button
Switches the appliance on
and off.
m
CAUTION!
The appliance is not isolated from
the mains when switched off by
the power button.
B ice button
Switches the ice maker on
and off. See also the section
on "Ice and water dispenser".
C alarm off button
Used to switch off the warning
signal.
See section on "Warning
message via the display".
D super button
Switches the Super function
on and off. See section on
"Super function".
E Display
The set required temperature
of the appliance is indicated
on the display. Activated
special functions are indicated
via symbols, e.g. Super
function –
SUPER
In Setup mode the menus as
well as the setting options are
indicated on the display.
See section on "Setup mode".
F
< >
Select the menus in setup
mode. See section on "Setup
mode".
The required temperature
adjustment is activated with
the
See section on "Setting the
temperature".
G + – buttons
Select the available
parameters of the menu.
See section on "Setup mode".
The displayed temperature of
the appliance is also changed
with the + – buttons.
See section on "Setting the
temperature".
H setup button
This button activates and also
ends Setup mode. When
Setup mode is ended with the
setup button, the changed
settings are saved.
J vacation button
Switches Vacation mode on
and off. See section on
$.
"Vacation mode".
buttons
buttons.
< >
Each button depression is
acknowledged by a signal if the
On setting is activated in Setup
mode, Sound menu (TONE).
Symbols at Display
Display for the freezer
compartment,
e.g. when setting the
temperature
Super function is
activated,
see page 10.
The Vacation mode is
activated,
see page 12.
For the setting options
in the Setup mode,
see page 11.
A warning message
is displayed,
see page 17.
The Ice maker is
switched on,
see page 15
9