Download Print this page

Conrad Electronic 77 54 64 Operating Instructions

Pc holder, can be rotated by 360

Advertisement

Quick Links

PC-Halterung 360° drehbar
Best.-Nr. 77 54 64
silber
Best.-Nr. 77 54 09
schwarz
1.
Bestimmungsgemäße Verwendung
Das Produkt dient zur Tischbefestigung eines Computers mit einem maximalen Gewicht bis ca. 20 kg.
Aus Sicherheitsgründen dürfen Sie das Produkt nicht umbauen und/oder verändern. Falls Sie das Produkt für
andere Zwecke verwenden, als zuvor beschrieben, kann das Produkt beschädigt werden. Lesen Sie sich die
Bedienungsanleitung genau durch und bewahren Sie diese auf. Reichen Sie das Produkt nur zusammen mit
der Bedienungsanleitung an dritte Personen weiter.
2.
Lieferumfang
PC-Halterung
Montagematerial
Bedienungsanleitung
3.
Sicherheitshinweise
Lesen Sie sich die Bedienungsanleitung aufmerksam durch und beachten Sie
insbesondere die Sicherheitshinweise. Falls Sie die Sicherheitshinweise und die Angaben
zur sachgemäßen Handhabung in dieser Bedienungsanleitung nicht befolgen, übernehmen
wir für dadurch resultierende Personen-/Sachschäden keine Haftung. Außerdem erlischt
in solchen Fällen die Gewährleistung/Garantie.
Personen / Produkt
Das Produkt ist kein Spielzeug. Halten Sie es von Kindern und Haustieren fern.
Schützen Sie das Produkt vor extremen Temperaturen, direktem Sonnenlicht, starken Erschütterungen,
hoher Feuchtigkeit, Nässe, brennbaren Gasen, Dämpfen und Lösungsmitteln.
Gehen Sie vorsichtig mit dem Produkt um. Durch Stöße, Schläge oder dem Fall aus bereits geringer Höhe
wird es beschädigt.
Beachten Sie auch die Sicherheitshinweise und Bedienungsanleitungen der übrigen Geräte, an die das
Produkt angeschlossen wird.
Sonstiges
Wenden Sie sich an eine Fachkraft, wenn Sie Zweifel über die Arbeitsweise, die Sicherheit oder den
Anschluss des Produktes haben.
Lassen Sie Wartungs-, Anpassungs- und Reparaturarbeiten ausschließlich von einem Fachmann bzw.
einer Fachwerkstatt durchführen.
Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beantwortet werden, wenden Sie
sich an unseren technischen Kundendienst oder an andere Fachleute.
4.
Inbetriebnahme
Befolgen Sie Montageanleitung auf der Rückseite. Sie erklärt schrittweise den Aufbau des Produktes.
Beachten Sie vor allem die Position der Ausbuchtungen in der vormontierten Aufhängung. In
der Montageanleitung unter Schritt 1 finden Sie eine Detaildarstellung in einem gestrichelten
Rahmen. Bei falscher Montage ist die Sicherung der Last nicht gewährleistet und die Konstruktion
kann keine gerade Postion einnehmen.
Die Bohrungen der Aufhängung sind leicht versetzt angebracht. Dadurch ist die Halterung nach
der Montage leicht schräg. Dies dient zur zusätzlichen Sicherung der Last. Durch das Gewicht
der Last wird die Halterung automatisch in eine gerade Position gebracht.
5.
Entsorgung
Elektronische Geräte sind Wertstoffe und gehören nicht in den Hausmüll.
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen
Bestimmungen.
6.
Technische Daten
Abmessungen (B x H x T): 455 x 240 x 605 mm
Maximales Gewicht:
20 kg
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie,
Mikroverfilmung, oder die Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der
schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderungen in Technik und Ausstattung vorbehalten.
© 2012 by Conrad Electronic SE.
Version 03/12
PC Holder, can be rotated by 360°
Item No. 77 54 64
Item No. 77 54 09
1.
Intended use
The product is designed to fix a computer with a weight of up to approx. 20 kg at a table.
For safety purposes, you must not rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In addition, improper use can cause hazards such
as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
2.
Delivery content
PC Holder
Mounting material
Operating instructions
3.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
The product is not a toy. Keep it out of the reach of children and pets.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Also observe the safety and operating instructions of any other devices which are connected to the
product.
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
shop.
If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4.
Operation
Follow the installation instructions on the back. They explain the installation of the product step by step.
Take particular note of the positions of convexities in the preassembled mounting. Under Step
1, the mounting instructions show a detailed illustration in a dotted line box. If mounting is done
incorrectly, the security of the load cannot be assured and the structure will not be able to assume
a straight position.
The mounting holes are slightly offset. This results in the mounting bracket being on a slight
slant after installation. This serves as an additional load support. With the weight of the load, the
mounting bracket will automatically move into a straight position.
5.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
6.
Technical data
Dimensions (W x H x D):
Maximum weight:
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting,
also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2012 by Conrad Electronic SE.
V3_0312_02-JU
black
silver
455 x 240 x 605 mm
20 kg
Version 03/12
V3_0312_02-JU

Advertisement

loading

Summary of Contents for Conrad Electronic 77 54 64

  • Page 1 Abmessungen (B x H x T): 455 x 240 x 605 mm Maximales Gewicht: 20 kg Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE, These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau. Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
  • Page 2 Poids maximal : 20 kg Maximum gewicht: 20 kg Cette notice est une publication de la société Conrad Electronic SE, Deze gebruiksaanwijzing is een publicatie van Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau/Allemagne. Klaus-Conrad-Straße 1, D-92240 Hirschau/Duitsland. Tous droits réservés, y compris de traduction. Toute reproduction, quelle qu’elle soit (p. ex. photocopie, Alle rechten, vertaling inbegrepen, voorbehouden.

This manual is also suitable for:

77 54 09