Advertisement
PAPER JAM
1. Turn the function switch to REV position to let the cutting blade run in the
reverse direction. The paper will reverse out from the throat.
2. Pull out the paper carefully to clear the throat.
3. Once the jammed paper is removed, turn the function switch to AUTO positon
for normal operation.
DISPOSE OF WASTE
1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assemble shredder correctly before shredding.
MOTOR OVER-HEAT SAFETY DEVICE
Your shredder is fitted with a safety device that switches off in the unit in event of an
overload. During an overload situation, the unit will stop automatically, and the
overheat protection indicator will light up. Turn the unit off and unplug from mains.
Allow the motor to cool down to room temperature before resuming operation. If the
unit fails to operate or the safety device switches the unit off again, return the unit.
Product Specification
Model:
Dimension:
Net weight:
Paper entry width:
Duty cycle:
Waste bin volume
Shred paper capacity:
Shred size:
Noise level:
Voltage:
Current:
Cleaning
The paper shredder requires regular cleaning.
1. Before cleaning ensure power is switched off at mains and plug has been removed.
2. Clean the outer surface with a soft damp cloth only.
3. Ensure the unit is dry before connect to the mains.
"
"
KESC7LTBK
315×148×228mm
1.215kg
217mm
2min ON 45min OFF
7 Litre
5 sheets(A4 80gsm)
7mm
73 dB approximately
220-240V~ 50Hz
0.5A
"
"
KESC7LTBK
Advertisement
