Vitesse VITM4-2CH Product Manual

VITM4-2CH
Vitesse Modular 4 - 2 Channel Switching Modules
• The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-
dustrial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected
using the spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors.
The modular approach allows for between 4 and 16 luminaires to be connected.
• The VITM4-2CH is a two channel, non-dimming distribution box for use in applications that require two independently
switched lighting circuits, or lighting and ventilation circuits. For example this product is ideal for connection to a 2
channel presence detector for separate window row switching. It has two live inputs, a common neutral and two
switch inputs.
202mm
150mm
Channel 1
VITM4-S-2CH
Vitesse modular starter for non-dimming systems
Height - allow 150mm for total height of unit (including connectors and cable)
BESA box fixings
Channel for channel nuts (zebs)
3 x Ø20mm knockouts for rear
cable entry
4 x key slots to accept M6 (1/4")
fixings
Warning. This device works at mains voltage. Be sure to take care when working with electricity.
• The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.
• Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.
Fixing points
M6 (1/4")
Channel 2
Product Guide
System Components
122mm
75mm
Channel 2
Channel 1
VITM4-E-2CH
Vitesse modular extender for non-dimming systems
Overview
9 pole interface
connector and lead
supplied with
detectors
Installation
Removable gland plate with
3 x Ø20mm knockouts
Install this way up
The unit MUST be
installed this way up
to ensure good lock
of cable plug to
socket.