NOTE: For Oval or Round Mirrors (0.9B & 0.9C)
For oval and round mirrors, it is advised that the mounting post assemblies be installed
slightly below center, at a perpendicular angle to the tangent line. This provides the mirror
•
DO NOT USE PLUMBER'S PUTTY ON ANY OF THE BRASS COMPONENTS
-
This will cause the finish to tarnish and void the warranty. A non-corrosive Alkoxy Silicone
is recommended.
To help ensure the beauty of brass accessories, never install an item until construction is almost
completed and after:
•
Workmen have finished treating nearby tile or marble with acid or chemicals.
•
The air conditioning or heat has been turned on.
•
The room has been painted or stained.
For technical support or warranty information, please call 718-257-2800
Bath Accessories – 0.9A/B/C/D Mirrors
assembly with extra support.
IMPORTANT INSTALLATION INFORMATION
Bath Accessories
0.9A/B/C/D Mirrors
Page 2