Advertisement
Advertisement
Table of Contents
Summary of Contents for SECURENET AVA
- Page 1 INDOOR CAMERA Quick Start Guide POWERED BY...
- Page 3 Getting to know the camera MICROPHONE LENS STATUS INDICATOR POWER OUTPUT RESET STATUS INDICATOR BUTTON + Flashing blue: the camera is on SPEAKER and ready for Wi-Fi connection + Steady blue: the camera is running properly + Steady red: the camera is starting + Flashing red: there is a network connection issue...
- Page 4 What’s in the box? INDOOR CAMERA POWER ADAPTER AND MICRO USB CABLE SCREWS & ANCHORS Installing a MicroSD card (optional) Open the side cover to insert a MicroSD card. The card will be formatted during the add camera process.
- Page 5 Powering the camera Connect the Micro USB end of the power cable to the camera and the USB end to the power adapter. If mounting, place the camera back onto the magnetic disc. Connect the power adapter to an AC power outlet to power up the camera.
- Page 6 Do not place the camera in extremely hot, cold, dusty, or damp locations, and do not expose it to electromagnetic radiation. The operating temperature is 14° F to 104° F (-10° C to +40° C). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the AVA and is the answer not in the manual?
Questions and answers