Advertisement
Hi
10.0
9.0
ctr
Pid
Pid
or
SEL
Default value is PID. Press SEL to store the setting
Pb
High Point Configuration
SEL
To change the maximum fan speed or
damper opening setting
High Point Current Setting
SEL
To change the Start Point Value
High Point Configuration
SEL
Default value is 10.0. Adjust the value from the Lo setting to 10.0
(represents percentage) press SEL to save setting
SEL
Configuration Prompt
This value will allow you to chose the controller type, the options are Proportional, Proportional-
Integral, and Proportional, Integral and Differential
Controller Type Current Setting
SEL
Adjust the controller to the type desired
Pi
SEL
Proportional Term Configuration
SEL
This term is the proportional gain constant, and take the value of 1/Pb, a larger Pb will slow the
speed of reaction to temperature change – Continue on Next Page
Prompt
Adjustment
Controller Type
P
or
Prompt
Controller
Type
SEL
Adjustment
Advertisement
