Belkin RK5015 Instructions Manual

RK5015ek INSTRUCTIONS
RK5015ek Product Inventory
Vertical Cable Manager (1)
Mounting Shoulder Washer (6)
10-32 x 1/2 Screw (6)
Installing Your RK5015ek Cable Manager
1. Place vertical cable management on either side of relay rack.
2. Pass the 10-32 x 1/2 screw through the shoulder washer and the 3 center holes of your relay rack on to the
tapped insert of your vertical cable management. Hint: Start the 3 screws before tightening.
3. Tighten your screws.
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK5015ek Instructions
MOUNTING HOLE
LOCATION
MOUNTING HOLE
LOCATION
3 PLACES
PER SIDE
MOUNTING HOLE
LOCATION
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
#10-32 THREADED
INSERTS
Belkin GmbH
Hanebergstrasse 2
80637 Munich,
Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Belkin SAS
130 rue de Silly
92100 Boulogne Billancourt,
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
P35763ec
EN
DE
FR