Belkin F8GBPC002 Software Manual page 6

The Main Screen Consists of:
Views of the Device
This will make clear which keys you are programming.
o
Menu Bar & Tool Bar
Mode Bar
This will allow you to select between Red, Green and Blue modes.
o
Controller Selection Corner
This will allow owners of multiple Nostromo devices to easily switch back and
o
forth between controllers when programming.
Function Assignment Hardpoints
These are the button or axis identifiers, such as "Button 01", where you click to
o
open your programming windows.
Make a Profile
This section will explain how to create a profile using the profile editor. In general, creating a
Profile consists of three functions, Remapping Single Key Assignments, Creating Macros and
Program Axis
1. To begin, Click on Start, then Programs, then Nostromo then Profile Editor. This will
display the Main Screen of the Profile Editor.
2. Left-Click on the Hardpoint labeled Button 01
3.
Select Single Key from the pop-up menu. This will bring up the
Single Key Assignment Screen
Remapping Single Key Assignments
This screen is used to select a single key to assign to one of the buttons on a Nostromo Game
Controller.
When a single key is assigned to a button, pushing the button is the same as pressing that key on
the keyboard.
If this is the first time you have assigned a single key to one of the hardpoints, the screen will look
similar to this:
6