SCS Sentinel OutCam SVI0056 Installation And User Manual page 17

Adding the camera
1.
Click on "NEW
DEVICE" to
add your camera.
4.
WIFI
2.
Enter your wi-fi key
and scan the QR
code on your camera
or enter the code
manually
5.
Enter a name for the
camera and the room in
which it is located.
Plug in the camera's power
cable and place it close to your
wi-fi router. Your phone must
be connected to the same wi-fi
network as your camera. Wait for
the voice command.
The network
needs to be
2.4 GHz to
work.
2.4 GHz
Personalize the
camera image by
adding a photo from
the gallery or your
phone camera. If
you select
"default image",
the product
image will appear
followed by a
snapshot of the last
movement.
3.
When the camera
announces "awaiting
setup'', press next. If
the camera makes no
announcement, hold the
Reset button down for
5 secs.
6.
EN
17