The two latitude adjustment T-bolts work in a push & pull fashion, as you tighten one you must loosen the other. Otherwise the bolts may bend resulting to damage not covered by warranty. You are now ready to mount the counterweight and optical tube to the EQ700 mount. Mounting the Counterweights Before proceeding make certain that the counterweight shaft (11) is pointing to the ground and that the DEC and R.A.
Page 8
Preparing your Mount and Telescope for Observation The following figure shows a fully assembled telescope consisting of an Opticstar EQ700 mount and an ARC 102 achromatic refractor. POLAR HOME POSITION Levelled mount Latitude Front Tripod leg is aligned North under the counterweight rod The telescope is in Home Position and ready to track the sky and various celestial objects via its R.A.
Need help?
Do you have a question about the EQ700 and is the answer not in the manual?
Questions and answers