System Build Linen Tower 8991015COM Manual page 17

STEP 10
With the of another person, carefully turn your unit over on its front. Position upper back panel (L)
as shown. Flush bottom edge with bottom edge of center shelf (G). Align squarely and nail (12)
straight into back edges as shown. Position lower back panel (M) as shown. Press top edge of
lower back panel (M) against the center shelf (G). Align squarely and nail (12) straight into back
edges as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
12
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x48)
#A21110
12
17