Table of Contents
Advertisement
WHITE PAPER
v2.1 (upd 09/10/2020)
PLACE OF INSTALLATION
The SPIDER 300A advanced radio telescope must be installed outdoors and, in order to guarantee the
necessary stability and to keep to the environmental conditions (rain, wind, etc.), it is necessary to make
a reinforced concrete plinth with specially sized foundations as outlined below. If you need a competent
service, especially for soil characteristics, you can show the professional the "Installation site" section
and the foundation scheme / installation scheme. In this section you will find the scheme of foundation
to be prepared to ensure the operation of the SPIDER 300A radio telescope. Only if the foundation's
features meet the requirements of PrimaLuceLab, the stability of the SPIDER 300A radio telescope is
guaranteed. The SPIDER 300A radio telescope is equipped with a dedicated column for ground
anchorage and to support the efforts generated by the 3 meter diameter parabola.
pag. 11
Advertisement
Table of Contents
